MOT Stats


Vehicle types : Car : Mercedes-Benz : 200

Mercedes-Benz 200

YearTestsPass rateMost common fail reason
19661100%n/a
197510%Battery insecure and likely to fall from carrier or cause a short circuit.
19771100%n/a
19792100%n/a
1980560%Wiper blade missing or not clearing the windscreen.
1981366.67%Excessive corrosion to, or weakened structure near any suspension mounting.
19822263.64%Suspension joint dust cover missing or ineffective.
19834580%Emissions levels exceed default limits.
19844160.98%Suspension joint dust cover missing or ineffective.
19853666.67%Emissions levels exceed default limits.
1986837.5%Emissions levels exceed default limits.
1987580%Brake lining or pad worn below 1.5mm.
19881580%Emissions levels exceed default limits.
19892171.43%Suspension spring broken or seriously weakened.
19902272.73%Direction indicator lamp missing or inoperative.
19912665.38%Excessive corrosion to, or weakened structure near any suspension mounting.
19924470.45%Position lamp missing or inoperative.
19933568.57%Position lamp missing or inoperative.
1994475%Anti-lock braking system warning device shows system malfunction.
1995540%Emissions test unable to be completed.
1996450%Suspension pin, bush, joint or bearing excessively worn.
19971100%n/a
1998666.67%Number plate inscription missing or illegible.
1999366.67%Tyre valve seriously damaged or misaligned likely to cause sudden deflation of the tyre.
2000475%Battery leaking.
2001650%Wiper blade missing or not clearing the windscreen.
20021283.33%Headlamp emitted colour, position or intensity not in accordance with requirements.
2003633.33%Headlamp aim outwith limits.
2004771.43%Suspension joint dust cover missing or ineffective.
20051030%Brake lining or pad worn below 1.5mm.
20062166.67%Suspension joint dust cover missing or ineffective.
20073259.38%Suspension pin, bush, joint or bearing excessively worn.
20082568%Parking brake efficiency below minimum requirement.
20091580%Tyre with a lump, bulge or tear.
20101643.75%Tyre tread depth not in accordance with requirements.
20111060%ESC component missing or damaged.
2012742.86%Electrical wiring insecure.
2013580%Engine MIL inoperative or indicating a malfunction.
2014475%Headlamp not securely attached.
20151090%Tyre tread depth not in accordance with requirements.
20161984.21%Brake lining or pad worn below 1.5mm.
20171181.82%Tyre with a lump, bulge or tear.
2018580%Brake lining or pad worn below 1.5mm.
20198100%n/a
20209100%n/a
202110%Anti-lock braking system warning device shows system malfunction.

Tests: 599

Average Mercedes-Benz 200 pass rate: 68.45%

Most common fail reasons

#ReasonFail codeCategory%
1Suspension joint dust cover missing or ineffective.5.3.4(b)(ii)Major14%
2Emissions levels exceed default limits.8.2.1.2(b)Major13%
3Headlamp aim outwith limits.4.1.2(a)Major10%
4Position lamp missing or inoperative.4.2.1(a)(ii)Major10%
5Suspension pin, bush, joint or bearing excessively worn.5.3.4(a)(i)Major8%
6Wiper blade missing or not clearing the windscreen.3.4(b)(ii)Major7%
7Exhaust system leaking or insecure.6.1.2(a)Major7%
8Stop lamp missing or inoperative.4.3.1(a)(ii)Major7%
9Parking brake efficiency below minimum requirement.1.4.2(a)(i)Major7%
10Brake pipe damaged or excessively corroded.1.1.11(c)Major6%
Tests date range:
10th February 2023 to 9th February 2024

Contains public sector information licensed under the Open Government Licence v3


Ad for Email Reminder