MOT Stats
Vehicle types : Car : MG
MG
Model | Tests | Pass rate | Most common fail reason |
1100 | 10 | 90% | Abnormal lag in brake operation on a wheel. |
1300 | 10 | 70% | Electrical wiring insecure. |
GS | 2,840 | 80.42% | Headlamp aim outwith limits. |
GT | 50 | 72% | Wiper blade missing or not clearing the windscreen. |
J2 | 1 | 100% | n/a |
Maestro | 50 | 78% | Emissions levels exceed default limits. |
Magnette | 58 | 86.21% | Windscreen washers not providing sufficient fluid. |
Metro | 110 | 71.82% | Emissions levels exceed default limits. |
MG | 726 | 84.99% | Electrical wiring insecure. |
MG3 | 18,428 | 77.71% | Headlamp aim outwith limits. |
MG6 | 2,181 | 59.24% | Suspension pin, bush, joint or bearing excessively worn. |
MGA | 300 | 90.67% | Windscreen washers not providing sufficient fluid. |
MGB | 3,376 | 79.59% | Windscreen washers not providing sufficient fluid. |
MGB GT | 1,857 | 79.11% | Windscreen washers not providing sufficient fluid. |
MGB GT V8 | 4 | 100% | n/a |
MGC | 287 | 80.14% | Brakes out of balance across an axle. |
MGF | 6,100 | 65.39% | Parking brake efficiency below minimum requirement. |
Midget | 1,057 | 78.43% | Windscreen washers not providing sufficient fluid. |
Montego | 17 | 70.59% | Excessive corrosion to, or weakened structure near any suspension mounting. |
PA | 5 | 100% | n/a |
RV8 | 548 | 87.23% | Headlamp aim outwith limits. |
Sports | 13 | 76.92% | Stop lamp missing or inoperative. |
T | 2 | 50% | Windscreen washers not providing sufficient fluid. |
TA | 3 | 100% | n/a |
TC | 23 | 95.65% | Stop lamps remain on when the brakes are released. |
TD | 37 | 89.19% | Electrical wiring insecure. |
TD/TF | 49 | 81.63% | Brakes out of balance across an axle. |
TF | 9,903 | 68.78% | Parking brake efficiency below minimum requirement. |
Xpower | 12 | 91.67% | Brake master cylinder leaking. |
YA | 3 | 100% | n/a |
Z | 1 | 0% | Headlamp aim outwith limits. |
ZR | 2,419 | 61.68% | Constant velocity joint boot missing, split, insecure or no longer prevents the ingress of dirt. |
ZR+ | 3 | 100% | n/a |
ZS | 25,717 | 83.72% | Electrical wiring insecure. |
ZT | 1,668 | 61.21% | SRS malfunction indicator lamp indicates a system malfunction. |
ZT+ | 27 | 51.85% | Suspension joint dust cover missing or ineffective. |
ZT-T | 965 | 56.27% | SRS malfunction indicator lamp indicates a system malfunction. |
Tests: 78,860
Average MG pass rate: 76.4%
Most common fail reasons
# | Reason | Fail code | Category | % |
1 | Headlamp aim outwith limits. | 4.1.2(a) | Major | 10% |
2 | Windscreen washers not providing sufficient fluid. | 3.5(a) | Major | 9% |
3 | Parking brake efficiency below minimum requirement. | 1.4.2(a)(i) | Major | 8% |
4 | Tyre with a lump, bulge or tear. | 5.2.3(d)(ii) | Dangerous | 7% |
5 | Suspension pin, bush, joint or bearing excessively worn. | 5.3.4(a)(i) | Major | 7% |
6 | Wiper blade missing or not clearing the windscreen. | 3.4(b)(ii) | Major | 7% |
7 | Electrical wiring insecure. | 4.11(a)(ii) | Major | 7% |
8 | Tyre tread depth not in accordance with requirements. | 5.2.3(e) | Dangerous | 6% |
9 | Excessive corrosion to, or weakened structure near any suspension mounting. | 5.3.6(a)(i) | Major | 5% |
10 | Brake lining or pad worn below 1.5mm. | 1.1.13(a)(ii) | Dangerous | 5% |
Tests date range:
23rd September 2022 to 22nd September 2023
Contains public sector information licensed under the Open Government Licence v3