MOT Stats
Vehicle types : Car : Daihatsu : Charade
Daihatsu Charade
| Year | Tests | Pass rate | Most common fail reason |
| 1982 | 2 | 50% | Emissions levels exceed default limits. |
| 1984 | 1 | 100% | n/a |
| 1985 | 1 | 100% | n/a |
| 1987 | 1 | 100% | n/a |
| 1988 | 5 | 80% | Headlamp aim outwith limits. |
| 1989 | 3 | 33.33% | Parking brake efficiency below minimum requirement. |
| 1990 | 3 | 66.67% | Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced. |
| 1991 | 5 | 60% | Excessive corrosion to, or weakened structure near any suspension mounting. |
| 1992 | 10 | 70% | Excessive corrosion to, or weakened structure near any suspension mounting. |
| 1993 | 10 | 50% | Shock absorber disfunctional or leaking severely. |
| 1994 | 6 | 66.67% | Seat belt load bearing structure strength significantly reduced near an anchorage point. |
| 1995 | 4 | 25% | Engine is idling clearly above its normal idle speed. |
| 1996 | 8 | 50% | Fuel system leaking, or missing or ineffective filler cap. |
| 1997 | 11 | 81.82% | Direction indicator lamp missing or inoperative. |
| 1998 | 6 | 83.33% | Parking brake efficiency below minimum requirement. |
| 1999 | 7 | 57.14% | Emissions levels exceed default limits. |
| 2000 | 19 | 42.11% | Emissions levels exceed the manufacturer's specified limits. |
| 2003 | 261 | 55.17% | Excessive corrosion to, or weakened structure near any suspension mounting. |
| 2004 | 376 | 55.32% | Excessive corrosion to, or weakened structure near any suspension mounting. |
| 2005 | 285 | 55.79% | Excessive corrosion to, or weakened structure near any suspension mounting. |
| 2006 | 257 | 58.37% | Suspension pin, bush, joint or bearing excessively worn. |
| 2007 | 64 | 62.5% | Suspension pin, bush, joint or bearing excessively worn. |
| 2009 | 1 | 100% | n/a |
| 2020 | 1 | 100% | n/a |
Tests: 1,347
Average Daihatsu Charade pass rate: 56.72%
Most common fail reasons
| # | Reason | Fail code | Category | % |
| 1 | Excessive corrosion to, or weakened structure near any suspension mounting. | 5.3.6(a)(i) | Major | 25% |
| 2 | Suspension pin, bush, joint or bearing excessively worn. | 5.3.4(a)(i) | Major | 22% |
| 3 | Wiper blade missing or not clearing the windscreen. | 3.4(b)(ii) | Major | 14% |
| 4 | Exhaust system leaking or insecure. | 6.1.2(a) | Major | 12% |
| 5 | Stop lamp missing or inoperative. | 4.3.1(a)(ii) | Major | 9% |
| 6 | Suspension joint dust cover missing or ineffective. | 5.3.4(b)(ii) | Major | 8% |
| 7 | Emissions lambda coefficient outwith limits. | 8.2.1.2(c) | Major | 7% |
| 8 | Engine MIL inoperative or indicating a malfunction. | 8.2.1.2(h) | Major | 7% |
| 9 | Headlamp beam image obviously incorrect. | 4.1.2(c) | Major | 7% |
| 10 | Headlamp aim outwith limits. | 4.1.2(a) | Major | 6% |
Tests date range:
10th February 2023 to 9th February 2024
Contains public sector information licensed under the Open Government Licence v3
Share 
