MOT Stats
Vehicle types : Car : Austin : A35
Austin A35
| Year | Tests | Pass rate | Most common fail reason |
| 1955 | 1 | 100% | n/a |
| 1957 | 17 | 88.24% | Leaking brake pipe or connection on a hydraulic system. |
| 1958 | 11 | 100% | n/a |
| 1959 | 13 | 76.92% | Fuel system leaking, or missing or ineffective filler cap. |
| 1960 | 1 | 100% | n/a |
| 1961 | 5 | 80% | Electrical wiring insecure. |
| 1962 | 1 | 100% | n/a |
| 1963 | 2 | 50% | Stop lamps all missing or inoperative. |
| 1964 | 1 | 100% | n/a |
| 1965 | 1 | 100% | n/a |
| 1966 | 1 | 100% | n/a |
| 1967 | 3 | 66.67% | Headlamp aim outwith limits. |
| 1968 | 3 | 100% | n/a |
| 1971 | 1 | 100% | n/a |
| 1988 | 1 | 100% | n/a |
| 1989 | 1 | 100% | n/a |
| 1991 | 1 | 100% | n/a |
| 2008 | 1 | 100% | n/a |
| 2012 | 1 | 100% | n/a |
| 2013 | 1 | 100% | n/a |
| 2017 | 1 | 100% | n/a |
Tests: 68
Average Austin A35 pass rate: 88.24%
Most common fail reasons
| # | Reason | Fail code | Category | % |
| 1 | Leaking brake pipe or connection on a hydraulic system. | 1.1.11(b)(ii) | Dangerous | 25% |
| 2 | Electrical wiring insecure. | 4.11(a)(ii) | Major | 25% |
| 3 | Fuel system leaking, or missing or ineffective filler cap. | 6.1.3(b)(i) | Major | 25% |
| 4 | Stop lamps all missing or inoperative. | 4.3.1(a)(iii) | Dangerous | 13% |
| 5 | Brakes excessively out of balance across an axle. | 1.2.1(b)(ii) | Dangerous | 13% |
| 6 | Steering linkage component with excessive movement between components or likely to become detached. | 2.1.3(a)(ii) | Dangerous | 13% |
| 7 | Stop lamps remain on when the brakes are released. | 4.3.2(a)(iii) | Dangerous | 13% |
| 8 | Braking effort inadequate at any wheel. | 1.3.1(a)(i) | Major | 13% |
| 9 | Parking brake efficiency below minimum requirement. | 1.4.2(a)(i) | Major | 13% |
| 10 | Suspension pin, bush, joint or bearing excessively worn. | 5.3.4(a)(i) | Major | 13% |
Tests date range:
10th February 2023 to 9th February 2024
Contains public sector information licensed under the Open Government Licence v3
Share 
