MOT Stats


Vehicle types : Car : Audi : Coupe

Audi Coupe

YearTestsPass rateMost common fail reason
197310%Brake lining or pad worn below 1.5mm.
19812100%n/a
19823100%n/a
19831593.33%Fog lamp inoperative or rear fog lamp missing.
1984966.67%Wheel bearing excessively rough.
19853387.88%Position lamp adversely affected by the operation of any other lamp.
19863577.14%Windscreen washers not providing sufficient fluid.
19872979.31%Parking brake efficiency below minimum requirement.
19882466.67%Suspension pin, bush, joint or bearing excessively worn.
19892989.66%Exhaust system leaking or insecure.
19903580%Windscreen washers not providing sufficient fluid.
19913871.05%Parking brake efficiency below minimum requirement.
19921788.24%Stop lamp missing or inoperative.
19935976.27%Position lamp missing or inoperative.
19945076%Windscreen washers not providing sufficient fluid.
19959376.34%Emissions levels exceed the manufacturer's specified limits.
19964755.32%Suspension pin, bush, joint or bearing excessively worn.
19972100%n/a
2000540%Suspension pin, bush, joint or bearing excessively worn.
2001560%Tyre tread depth not in accordance with requirements.
2002580%Tyre with a lump, bulge or tear.
20031100%n/a
2004366.67%Engine MIL inoperative or indicating a malfunction.
2007250%Tyre tread depth not in accordance with requirements.
20083100%n/a
2009366.67%Windscreen washers not providing sufficient fluid.
20112100%n/a
20151100%n/a

Tests: 551

Average Audi Coupe pass rate: 76.04%

Most common fail reasons

#ReasonFail codeCategory%
1Position lamp missing or inoperative.4.2.1(a)(ii)Major16%
2Suspension pin, bush, joint or bearing excessively worn.5.3.4(a)(i)Major15%
3Windscreen washers not providing sufficient fluid.3.5(a)Major13%
4Emissions levels exceed default limits.8.2.1.2(b)Major12%
5Binding brake.1.2.1(f)Major11%
6Parking brake efficiency below minimum requirement.1.4.2(a)(i)Major11%
7Exhaust system leaking or insecure.6.1.2(a)Major11%
8Fog lamp inoperative or rear fog lamp missing.4.5.1(a)(ii)Major11%
9Emissions test unable to be completed.8.2.1.2(d)Major10%
10Direction indicator lamp missing or inoperative.4.4.1(a)(ii)Major9%
Tests date range:
10th February 2023 to 9th February 2024

Contains public sector information licensed under the Open Government Licence v3


Ad for Email Reminder