MOT Stats
Vehicle types : Van : Volkswagen : Panelvan
Volkswagen Panelvan
| Year | Tests | Pass rate | Most common fail reason |
| 1972 | 1 | 0% | Leaking brake pipe or connection on a hydraulic system. |
| 1986 | 1 | 0% | Shock absorber insecurely attached to chassis or axle. |
| 1987 | 2 | 100% | n/a |
| 1989 | 1 | 0% | Parking brake efficiency below minimum requirement. |
| 1991 | 2 | 100% | n/a |
| 1996 | 1 | 0% | Suspension pin, bush, joint or bearing likely to become detached. |
| 1998 | 1 | 0% | Excessive corrosion to, or weakened structure near any suspension mounting. |
| 1999 | 1 | 100% | n/a |
| 2006 | 2 | 50% | Seat belt load bearing structure strength significantly reduced near an anchorage point. |
| 2011 | 1 | 100% | n/a |
| 2013 | 1 | 100% | n/a |
Tests: 14
Average Volkswagen Panelvan pass rate: 57.14%
Most common fail reasons
| # | Reason | Fail code | Category | % |
| 1 | Parking brake efficiency below minimum requirement. | 1.4.2(a)(i) | Major | 33% |
| 2 | Excessive corrosion to, or weakened structure near any suspension mounting. | 5.3.6(a)(i) | Major | 33% |
| 3 | Seat belt load bearing structure strength significantly reduced near an anchorage point. | 7.1.1(a)(i) | Major | 33% |
| 4 | Leaking brake pipe or connection on a hydraulic system. | 1.1.11(b)(ii) | Dangerous | 17% |
| 5 | Emissions test unable to be completed. | 8.2.2.2(e) | Major | 17% |
| 6 | Brake performance unable to be tested. | 1.2.1(g) | Major | 17% |
| 7 | Suspension pin, bush, joint or bearing likely to become detached. | 5.3.4(a)(ii) | Dangerous | 17% |
| 8 | Binding brake. | 1.2.1(f) | Major | 17% |
| 9 | Braking effort inadequate at a wheel. | 1.2.1(a)(i) | Major | 17% |
| 10 | Constant velocity joint boot missing, split, insecure or no longer prevents the ingress of dirt. | 6.1.7(g)(ii) | Major | 17% |
Tests date range:
10th February 2023 to 9th February 2024
Contains public sector information licensed under the Open Government Licence v3
Share 
