MOT Stats
Vehicle types : Van : Toyota : Liteace
Toyota Liteace
Year | Tests | Pass rate | Most common fail reason |
1963 | 1 | 0% | Electrical wiring insecure. |
1986 | 1 | 100% | n/a |
1987 | 2 | 50% | Body, cab or chassis excessively corroded at mounting points. |
1988 | 5 | 80% | Fog lamp inoperative or rear fog lamp missing. |
1989 | 1 | 100% | n/a |
1990 | 2 | 100% | n/a |
1991 | 2 | 50% | Mandatory hazard warning device inoperative. |
1992 | 8 | 62.5% | Brake hose excessively damaged, twisted or stretched. |
1993 | 17 | 70.59% | Wiper blade missing or not clearing the windscreen. |
1994 | 7 | 57.14% | Body panel or body component damaged, corroded or insecure and likely to cause injury when grazed or contacted. |
1995 | 1 | 100% | n/a |
1996 | 1 | 100% | n/a |
1997 | 2 | 0% | Body panel or body component damaged, corroded or insecure and likely to cause injury when grazed or contacted. |
1998 | 1 | 0% | Position lamp missing or inoperative. |
2000 | 5 | 80% | Seat belt load bearing structure strength significantly reduced near an anchorage point. |
2001 | 1 | 0% | Electrical wiring heavily deteriorated. |
2002 | 3 | 0% | Windscreen washers not providing sufficient fluid. |
2003 | 3 | 100% | n/a |
2004 | 4 | 75% | Body, cab or chassis excessively corroded at mounting points. |
2005 | 4 | 75% | Exhaust system leaking or insecure. |
2006 | 7 | 42.86% | Excessive corrosion to, or weakened structure near any suspension mounting. |
2007 | 4 | 25% | ESC switch damaged or not functioning correctly. |
2008 | 4 | 100% | n/a |
2009 | 6 | 33.33% | A main load-bearing structural member fractured or deformed such that structural rigidity is significantly reduced. |
2010 | 2 | 50% | Stop lamp missing or inoperative. |
2011 | 1 | 100% | n/a |
2012 | 2 | 50% | Parking brake efficiency below minimum requirement. |
2014 | 1 | 100% | n/a |
2015 | 1 | 100% | n/a |
2016 | 1 | 100% | n/a |
2019 | 2 | 100% | n/a |
2020 | 1 | 0% | Exhaust system leaking or insecure. |
Tests: 103
Average Toyota Liteace pass rate: 62.14%
Most common fail reasons
# | Reason | Fail code | Category | % |
1 | Excessive corrosion to, or weakened structure near any suspension mounting. | 5.3.6(a)(i) | Major | 23% |
2 | Wiper blade missing or not clearing the windscreen. | 3.4(b)(ii) | Major | 18% |
3 | Windscreen washers not providing sufficient fluid. | 3.5(a) | Major | 15% |
4 | Seat belt load bearing structure strength significantly reduced near an anchorage point. | 7.1.1(a)(i) | Major | 13% |
5 | Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced. | 6.1.1(c)(i) | Major | 13% |
6 | Position lamp missing or inoperative. | 4.2.1(a)(ii) | Major | 10% |
7 | Fog lamp inoperative or rear fog lamp missing. | 4.5.1(a)(ii) | Major | 8% |
8 | Exhaust system leaking or insecure. | 6.1.2(a) | Major | 8% |
9 | Tyre with a lump, bulge or tear. | 5.2.3(d)(ii) | Dangerous | 8% |
10 | Electrical wiring insecure. | 4.11(a)(ii) | Major | 8% |
Tests date range:
10th February 2023 to 9th February 2024
Contains public sector information licensed under the Open Government Licence v3