MOT Stats

Triumph

Model	Tests	Pass rate	Most common fail reason
2.5PI	29	96.55%	Brake servo inoperative.
13/60	3	33.33%	Battery insecure and likely to fall from carrier or cause a short circuit.
1300	23	91.3%	Binding brake.
1300TC	2	100%	n/a
1500	13	76.92%	Floor excessively deteriorated or insecure.
1500TC	9	55.56%	Brake actuator leaking, performance not affected.
1800TD	1	100%	n/a
2000	155	82.58%	Windscreen washers not providing sufficient fluid.
2500	20	90%	Position lamp showing wrong colour or heavily reduced light intensity.
2500S	31	74.19%	Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced.
2500TC	12	83.33%	Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced.
Acclaim	124	70.97%	Excessive corrosion to, or weakened structure near any suspension mounting.
Coupe	4	50%	A main load-bearing structural member fractured or deformed such that structural rigidity is significantly reduced.
Dolomite	425	69.88%	Emissions levels exceed default limits.
Dolomite Sprint	13	76.92%	Horn inoperative.
Gentry	8	87.5%	Stop lamps all missing or inoperative.
GT6	274	71.9%	Parking brake efficiency below minimum requirement.
GT6 Mk2	1	0%	Tyre tread depth not in accordance with requirements.
GT6 Mk3	4	100%	n/a
Herald	611	74.96%	Brakes out of balance across an axle.
Mayflower	4	75%	Direction indicator lamp missing or inoperative.
Moss	3	66.67%	Tyre with a cut in excess of the requirements.
PI	3	66.67%	Horn inoperative.
Renown	3	66.67%	Position lamp missing or inoperative.
Roadster	10	80%	Binding brake.
Spitfire	1,489	67.49%	Emissions levels exceed default limits.
Stag	1,826	74.04%	Windscreen washers not providing sufficient fluid.
Toledo	38	68.42%	Excessive corrosion to, or weakened structure near any suspension mounting.
TR2	49	85.71%	Stop lamp missing or inoperative.
TR3	206	84.47%	Windscreen washers not providing sufficient fluid.
TR3A	25	84%	Direction indicator lamp emitted colour, position or intensity not in accordance with requirements.
TR4	326	84.05%	Brakes out of balance across an axle.
TR4A	282	83.33%	Windscreen washers not providing sufficient fluid.
TR5	198	86.36%	Windscreen washers not providing sufficient fluid.
TR6	1,448	80.32%	Windscreen washers not providing sufficient fluid.
TR6C	5	100%	n/a
TR6R	14	92.86%	Electrical wiring insecure.
TR7	826	64.77%	Emissions levels exceed default limits.
TR8	53	64.15%	Windscreen washers not providing sufficient fluid.
TR250	23	91.3%	Windscreen washers not providing sufficient fluid.
Vitesse	381	80.31%	Windscreen washers not providing sufficient fluid.

Tests: 8,974

Average Triumph pass rate: 74.7%

Most common fail reasons

#	Reason	Fail code	Category	%
1	Windscreen washers not providing sufficient fluid.	3.5(a)	Major	18%
2	Brakes out of balance across an axle.	1.2.1(b)(i)	Major	13%
3	Parking brake efficiency below minimum requirement.	1.4.2(a)(i)	Major	13%
4	Emissions levels exceed default limits.	8.2.1.2(b)	Major	11%
5	Electrical wiring insecure.	4.11(a)(ii)	Major	11%
6	Headlamp aim outwith limits.	4.1.2(a)	Major	10%
7	Steering rack gaiter or ball joint dust cover missing or damaged.	2.1.3(g)(ii)	Major	10%
8	Binding brake.	1.2.1(f)	Major	9%
9	Direction indicator lamp missing or inoperative.	4.4.1(a)(ii)	Major	9%
10	Position lamp missing or inoperative.	4.2.1(a)	Major	9%

Tests date range: 20th May 2018 to 9th April 2019

Contains public sector information licensed under the Open Government Licence v3

Home Contact About Mobile site