MOT Stats
Vehicle types : Car : Subaru
Subaru
| Model | Tests | Pass rate | Most common fail reason |
| 1.6L | 1 | 100% | n/a |
| 1.8 | 6 | 83.33% | Brake efficiency below minimum requirement. |
| 18L | 2 | 100% | n/a |
| 284 | 47 | 59.57% | Excessive corrosion to, or weakened structure near any suspension mounting. |
| 1600 | 1 | 100% | n/a |
| 1800 | 4 | 75% | Stop lamp missing or inoperative. |
| B4 | 1 | 0% | More than one loose or missing wheel nut, bolt or stud. |
| B9 Tribeca | 215 | 56.74% | Suspension spring broken or seriously weakened. |
| Baja | 1 | 0% | Brake lining or pad worn below 1.5mm. |
| BRZ | 897 | 90.08% | Windscreen washers not providing sufficient fluid. |
| Domingo | 6 | 33.33% | Windscreen washers not providing sufficient fluid. |
| Exiga | 59 | 71.19% | Fog lamp inoperative or rear fog lamp missing. |
| Forester | 16,535 | 69.75% | Suspension pin, bush, joint or bearing excessively worn. |
| Forrester | 8 | 75% | Position lamp showing wrong colour or heavily reduced light intensity. |
| GT | 2 | 100% | n/a |
| Impreza | 18,773 | 73.16% | Position lamp missing or inoperative. |
| Justy | 698 | 66.05% | Suspension pin, bush, joint or bearing excessively worn. |
| Legacy | 5,941 | 62.5% | Suspension pin, bush, joint or bearing excessively worn. |
| Levorg | 625 | 87.52% | Tyre with a lump, bulge or tear. |
| Libero | 1 | 100% | n/a |
| MV | 92 | 57.61% | Direction indicator lamp missing or inoperative. |
| Outback | 7,400 | 73.96% | Suspension pin, bush, joint or bearing excessively worn. |
| R2 | 3 | 100% | n/a |
| Saloon | 3 | 100% | n/a |
| SVX | 42 | 64.29% | Emissions levels exceed the manufacturer's specified limits. |
| Tribeca | 64 | 57.81% | Suspension pin, bush, joint or bearing excessively worn. |
| Turbo 2000 | 2 | 100% | n/a |
| Type-R | 4 | 100% | n/a |
| Vivio | 9 | 66.67% | Suspension pin, bush, joint or bearing excessively worn. |
| WRX | 1,874 | 89.06% | Emissions levels exceed default limits. |
| XT | 4 | 75% | Tyre tread depth not in accordance with requirements. |
| XV | 6,036 | 83.04% | Suspension pin, bush, joint or bearing excessively worn. |
| Yellow | 1 | 100% | n/a |
Tests: 59,357
Average Subaru pass rate: 72.96%
Most common fail reasons
| # | Reason | Fail code | Category | % |
| 1 | Suspension pin, bush, joint or bearing excessively worn. | 5.3.4(a)(i) | Major | 16% |
| 2 | Position lamp missing or inoperative. | 4.2.1(a)(ii) | Major | 14% |
| 3 | Stop lamp missing or inoperative. | 4.3.1(a)(ii) | Major | 8% |
| 4 | Excessive corrosion to, or weakened structure near any suspension mounting. | 5.3.6(a)(i) | Major | 8% |
| 5 | Headlamp aim outwith limits. | 4.1.2(a) | Major | 8% |
| 6 | Windscreen washers not providing sufficient fluid. | 3.5(a) | Major | 8% |
| 7 | Engine MIL inoperative or indicating a malfunction. | 8.2.1.2(h) | Major | 7% |
| 8 | Wiper blade missing or not clearing the windscreen. | 3.4(b)(ii) | Major | 7% |
| 9 | Emissions lambda coefficient outwith limits. | 8.2.1.2(c) | Major | 7% |
| 10 | Brake lining or pad worn below 1.5mm. | 1.1.13(a)(ii) | Dangerous | 6% |
Tests date range:
23rd September 2022 to 22nd September 2023
Contains public sector information licensed under the Open Government Licence v3
Share 
