MOT Stats

Rover

Model	Tests	Pass rate	Most common fail reason
3 Litre	41	80.49%	Wiper blade missing or not clearing the windscreen.
3.5	96	89.58%	Windscreen washers not providing sufficient fluid.
6r4	2	100%	n/a
10	1	100%	n/a
12	1	100%	n/a
14	3	100%	n/a
16	1	100%	n/a
25	9,739	54.2%	Constant velocity joint boot missing or split.
45	5,746	51.22%	Constant velocity joint boot missing or split.
75	14,008	50.86%	Suspension pin, bush or joint excessively worn.
90	16	81.25%	Stop lamps all missing or inoperative.
100	368	62.77%	Brakes out of balance across an axle.
110	44	79.55%	Brakes out of balance across an axle.
111	238	57.56%	Excessive corrosion to, or weakened structure near any suspension mounting.
114	234	59.83%	Excessive corrosion to, or weakened structure near any suspension mounting.
115	12	58.33%	Wiper blade missing or not clearing the windscreen.
200	192	54.69%	Excessive corrosion to, or weakened structure near any suspension mounting.
211	210	49.52%	Constant velocity joint boot missing or split.
213	29	62.07%	Brakes out of balance across an axle.
214	1,350	53.33%	Excessive corrosion to, or weakened structure near any suspension mounting.
214i	6	50%	Stop lamp missing or inoperative.
216	1,084	53.87%	Excessive corrosion to, or weakened structure near any suspension mounting.
216i	25	80%	Emissions levels exceed the manufacturer's specified limits.
218	142	56.34%	Excessive corrosion to, or weakened structure near any suspension mounting.
220	332	51.81%	Seat belt load bearing structure strength significantly reduced near an anchorage point.
400	4	50%	Constant velocity joint boot missing or split.
414	406	52.22%	Excessive corrosion to, or weakened structure near any suspension mounting.
416	939	51.76%	Excessive corrosion to, or weakened structure near any suspension mounting.
418	56	51.79%	Seat belt load bearing structure strength significantly reduced near an anchorage point.
420	330	48.79%	Excessive corrosion to, or weakened structure near any suspension mounting.
618	339	53.39%	Parking brake efficiency below minimum requirement.
618i	5	40%	Constant velocity joint boot missing or split.
620	805	49.69%	Parking brake efficiency below minimum requirement.
620i	2	50%	Registration plate lamp missing or inoperative.
623	106	46.23%	Parking brake efficiency below minimum requirement.
800	25	52%	Direction indicator lamp missing or inoperative.
820	216	55.09%	Parking brake efficiency below minimum requirement.
825	91	59.34%	Headlamp aim outwith limits.
827	89	67.42%	Excessive corrosion to, or weakened structure near any suspension mounting.
2000	67	77.61%	Excessive corrosion to, or weakened structure near any suspension mounting.
2000SC	32	78.13%	Headlamp aim outwith limits.
2200	28	67.86%	Brake efficiency well below minimum requirement.
2300	12	83.33%	Exhaust system leaking or insecure.
2400	1	100%	n/a
2600	23	52.17%	Excessive corrosion to, or weakened structure near any suspension mounting.
3500	273	76.19%	Windscreen washers not providing sufficient fluid.
Allegro	36	72.22%	Excessive corrosion to, or weakened structure near any suspension mounting.
Cityrover	483	44.1%	Suspension pin, bush or joint excessively worn.
Cooper	7	100%	n/a
Coupe	7	85.71%	Steering ball joint with excessive wear.
Maestro	182	68.13%	Emissions levels exceed default limits.
Metro	680	63.09%	Excessive corrosion to, or weakened structure near any suspension mounting.
MG	24	70.83%	Windscreen washers not providing sufficient fluid.
MGF	28	53.57%	Emissions levels exceed default limits.
Mini	7,950	60.99%	Emissions levels exceed default limits.
Montego	60	55%	Seat belt load bearing structure strength significantly reduced near an anchorage point.
P4	11	81.82%	Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced.
P5	44	75%	Parking brake efficiency well below minimum requirement.
P5b	13	76.92%	Windscreen washers not providing sufficient fluid.
P6	33	90.91%	Stop lamps all missing or inoperative.
P60	2	100%	n/a
Range Rover	13	61.54%	Suspension pin, bush or joint excessively worn.
SD1	165	71.52%	Emissions levels exceed default limits.
Series 1	2	100%	n/a
Sterling	34	50%	Anti-lock braking system warning device shows system malfunction.
Streetwise	1,077	52.92%	Constant velocity joint boot missing or split.
Tourer	3	100%	n/a
Vitesse	13	76.92%	Tyre not fitted in compliance with the manufacturer's instructions.
ZS	1	100%	n/a

Tests: 48,637

Average Rover pass rate: 54.43%

Most common fail reasons

#	Reason	Fail code	Category	%
1	Suspension pin, bush or joint excessively worn.	5.3.4(a)(i)	Major	14%
2	Constant velocity joint boot missing or split.	6.1.7(g)(ii)	Major	13%
3	Excessive corrosion to, or weakened structure near any suspension mounting.	5.3.6(a)(i)	Major	12%
4	Headlamp aim outwith limits.	4.1.2(a)	Major	11%
5	Wiper blade missing or not clearing the windscreen.	3.4(b)(ii)	Major	10%
6	Exhaust system leaking or insecure.	6.1.2(a)	Major	9%
7	Parking brake efficiency below minimum requirement.	1.4.2(a)(i)	Major	8%
8	Brake pipe damaged or excessively corroded.	1.1.11(c)	Major	8%
9	Position lamp missing or inoperative.	4.2.1(a)	Major	8%
10	Stop lamp missing or inoperative.	4.3.1(a)(ii)	Major	8%

Tests date range: 20th May 2018 to 5th December 2018

Contains public sector information licensed under the Open Government Licence v3

Home Contact About Mobile site