MOT Stats
Vehicle types : Car : Nissan : Almera
Nissan Almera
| Year | Tests | Pass rate | Most common fail reason |
| 1995 | 6 | 83.33% | Excessive corrosion to, or weakened structure near any suspension mounting, so weakened that control of the vehicle is likely to be adversely affected. |
| 1996 | 64 | 37.5% | Excessive corrosion to, or weakened structure near any suspension mounting. |
| 1997 | 97 | 53.61% | Constant velocity joint boot missing, split, insecure or no longer prevents the ingress of dirt. |
| 1998 | 176 | 57.95% | Excessive corrosion to, or weakened structure near any suspension mounting. |
| 1999 | 194 | 53.61% | Excessive corrosion to, or weakened structure near any suspension mounting. |
| 2000 | 342 | 54.09% | Excessive corrosion to, or weakened structure near any suspension mounting. |
| 2001 | 856 | 56.78% | Excessive corrosion to, or weakened structure near any suspension mounting. |
| 2002 | 2,051 | 54.41% | Stop lamp missing or inoperative. |
| 2003 | 2,385 | 55.39% | Stop lamp missing or inoperative. |
| 2004 | 4,174 | 55.53% | Stop lamp missing or inoperative. |
| 2005 | 5,278 | 55.21% | Headlamp beam image obviously incorrect. |
| 2006 | 1,468 | 54.97% | Wiper blade missing or not clearing the windscreen. |
| 2007 | 28 | 46.43% | Stop lamp missing or inoperative. |
| 2008 | 1 | 100% | n/a |
| 2009 | 3 | 33.33% | Position lamp missing or inoperative. |
| 2010 | 5 | 40% | Excessive corrosion to, or weakened structure near any suspension mounting. |
| 2011 | 1 | 0% | Parking brake efficiency below minimum requirement. |
| 2012 | 1 | 0% | Braking effort inadequate at any wheel. |
| 2015 | 2 | 50% | Brake lining or pad worn below 1.5mm. |
| 2019 | 2 | 50% | Wiper blade missing or not clearing the windscreen. |
Tests: 17,134
Average Nissan Almera pass rate: 55.17%
Most common fail reasons
| # | Reason | Fail code | Category | % |
| 1 | Stop lamp missing or inoperative. | 4.3.1(a)(ii) | Major | 13% |
| 2 | Wiper blade missing or not clearing the windscreen. | 3.4(b)(ii) | Major | 11% |
| 3 | Position lamp missing or inoperative. | 4.2.1(a)(ii) | Major | 10% |
| 4 | Headlamp beam image obviously incorrect. | 4.1.2(c) | Major | 10% |
| 5 | Exhaust system leaking or insecure. | 6.1.2(a) | Major | 9% |
| 6 | Electrical wiring insecure. | 4.11(a)(ii) | Major | 9% |
| 7 | Binding brake. | 1.2.1(f) | Major | 9% |
| 8 | Headlamp aim outwith limits. | 4.1.2(a) | Major | 9% |
| 9 | Excessive corrosion to, or weakened structure near any suspension mounting. | 5.3.6(a)(i) | Major | 8% |
| 10 | Suspension pin, bush, joint or bearing excessively worn. | 5.3.4(a)(i) | Major | 8% |
Tests date range:
10th February 2023 to 9th February 2024
Contains public sector information licensed under the Open Government Licence v3
Share 
