MOT Stats


Vehicle types : Car : Mercedes-Benz : 280

Mercedes-Benz 280

YearTestsPass rateMost common fail reason
19682176.19%Suspension pin, bush, joint or bearing excessively worn.
19692792.59%Fuel system leaking, or missing or ineffective filler cap.
19703167.74%Electrical wiring insecure.
197115100%n/a
19721291.67%Windscreen washers not providing sufficient fluid.
1973475%Windscreen washers not providing sufficient fluid.
1975771.43%Emissions levels exceed default limits.
19761100%n/a
1977366.67%Body, cab or chassis excessively corroded at mounting points.
1978862.5%Headlamp beam image obviously incorrect.
19798100%n/a
19801485.71%Excessive corrosion to, or weakened structure near any suspension mounting.
19812774.07%Exhaust emits dense blue or black smoke for a continuous period of 5 seconds at idle.
19825775.44%Headlamp aim outwith limits.
198313178.63%Electrical wiring insecure.
198414776.87%Headlamp aim outwith limits.
198516772.46%Windscreen washers not providing sufficient fluid.
19862075%Direction indicator lamp missing or inoperative.
19872190.48%Brake actuator leaking, performance affected.
19882268.18%Fog lamp inoperative or rear fog lamp missing.
19892070%Windscreen washers not providing sufficient fluid.
19901687.5%Steering rack gaiter or ball joint dust cover missing or damaged.
1991475%Brake pipe damaged or excessively corroded.
1992666.67%Brake hose excessively damaged, twisted or stretched.
19933666.67%Headlamp aim outwith limits.
19941100%n/a
19955100%n/a
19963100%n/a
1997580%Tyre with a lump, bulge or tear.
1998425%Direction indicator or hazard warning switch inoperative.
19991100%n/a
20002100%n/a
2001250%Binding brake.
2002757.14%Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced.
20032100%n/a
2004560%Tyre tread depth not in accordance with requirements.
20055100%n/a
20061485.71%Steering ball joint with excessive wear.
20071471.43%Stop lamp missing or inoperative.
20081478.57%Steering ball joint with excessive wear.
2009977.78%Steering ball joint with excessive wear.
2010250%Tyre tread depth not in accordance with requirements.
20111100%n/a
2012580%Fog lamp inoperative or rear fog lamp missing.
20132100%n/a
20142100%n/a
2015475%Headlamp aim outwith limits.
20163100%n/a
20171100%n/a
2018366.67%Brake efficiency below minimum requirement.
20191100%n/a
20211100%n/a
20221100%n/a

Tests: 944

Average Mercedes-Benz 280 pass rate: 76.91%

Most common fail reasons

#ReasonFail codeCategory%
1Headlamp aim outwith limits.4.1.2(a)Major15%
2Excessive corrosion to, or weakened structure near any suspension mounting.5.3.6(a)(i)Major13%
3Windscreen washers not providing sufficient fluid.3.5(a)Major12%
4Electrical wiring insecure.4.11(a)(ii)Major9%
5Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced.6.1.1(c)(i)Major8%
6Position lamp missing or inoperative.4.2.1(a)(ii)Major8%
7Stop lamp missing or inoperative.4.3.1(a)(ii)Major8%
8Fog lamp inoperative or rear fog lamp missing.4.5.1(a)(ii)Major8%
9Steering rack gaiter or ball joint dust cover missing or damaged.2.1.3(g)(ii)Major7%
10Binding brake.1.2.1(f)Major7%
Tests date range:
10th February 2023 to 9th February 2024

Contains public sector information licensed under the Open Government Licence v3


Ad for Email Reminder