MOT Stats
Vehicle types : Car : Mercedes-Benz : 190
Mercedes-Benz 190
Year | Tests | Pass rate | Most common fail reason |
1956 | 1 | 100% | n/a |
1959 | 1 | 100% | n/a |
1960 | 4 | 100% | n/a |
1961 | 2 | 100% | n/a |
1962 | 2 | 100% | n/a |
1963 | 3 | 100% | n/a |
1965 | 3 | 66.67% | Brake efficiency well below minimum requirement. |
1971 | 1 | 100% | n/a |
1984 | 9 | 55.56% | Tyre with a lump, bulge or tear. |
1985 | 15 | 73.33% | Emissions levels exceed default limits. |
1986 | 31 | 64.52% | Suspension joint dust cover missing or ineffective. |
1987 | 41 | 70.73% | Parking brake efficiency below minimum requirement. |
1988 | 56 | 78.57% | Position lamp missing or inoperative. |
1989 | 126 | 73.02% | Emissions levels exceed default limits. |
1990 | 83 | 75.9% | Emissions levels exceed default limits. |
1991 | 65 | 81.54% | Headlamp aim outwith limits. |
1992 | 72 | 75% | Direction indicator lamp missing or inoperative. |
1993 | 49 | 69.39% | Suspension spring broken or seriously weakened. |
1994 | 2 | 100% | n/a |
1995 | 1 | 100% | n/a |
1996 | 2 | 50% | Tyre with a lump, bulge or tear. |
1997 | 2 | 100% | n/a |
1998 | 1 | 100% | n/a |
1999 | 1 | 100% | n/a |
2000 | 1 | 100% | n/a |
2001 | 1 | 100% | n/a |
2003 | 3 | 66.67% | Excessive corrosion to, or weakened structure near any suspension mounting. |
2007 | 2 | 100% | n/a |
2009 | 1 | 0% | Suspension spring broken or seriously weakened. |
2010 | 3 | 66.67% | Windscreen washers not providing sufficient fluid. |
2011 | 2 | 100% | n/a |
2013 | 2 | 50% | Driver's seat moving inadvertently or backrest cannot be retained in the upright position. |
2015 | 5 | 60% | Brake lining or pad worn below 1.5mm. |
2016 | 1 | 100% | n/a |
2017 | 3 | 100% | n/a |
2018 | 2 | 50% | Electrical wiring insecure. |
2019 | 2 | 100% | n/a |
2020 | 1 | 100% | n/a |
Tests: 602
Average Mercedes-Benz 190 pass rate: 74.92%
Most common fail reasons
# | Reason | Fail code | Category | % |
1 | Headlamp aim outwith limits. | 4.1.2(a) | Major | 14% |
2 | Excessive corrosion to, or weakened structure near any suspension mounting. | 5.3.6(a)(i) | Major | 14% |
3 | Emissions levels exceed default limits. | 8.2.1.2(b) | Major | 13% |
4 | Suspension spring broken or seriously weakened. | 5.3.1(b)(i) | Major | 11% |
5 | Position lamp missing or inoperative. | 4.2.1(a)(ii) | Major | 11% |
6 | Windscreen washers not providing sufficient fluid. | 3.5(a) | Major | 9% |
7 | Brake pipe damaged or excessively corroded. | 1.1.11(c) | Major | 8% |
8 | Exhaust system leaking or insecure. | 6.1.2(a) | Major | 7% |
9 | Suspension pin, bush, joint or bearing excessively worn. | 5.3.4(a)(i) | Major | 7% |
10 | Parking brake efficiency below minimum requirement. | 1.4.2(a)(i) | Major | 7% |
Tests date range:
10th February 2023 to 9th February 2024
Contains public sector information licensed under the Open Government Licence v3