MOT Stats


Vehicle types : Car : Land Rover : 109

Land Rover 109

YearTestsPass rateMost common fail reason
19521100%n/a
195810%Position lamp missing or inoperative.
19592100%n/a
19601100%n/a
19611100%n/a
19621100%n/a
19631100%n/a
1964540%Excessive corrosion to, or weakened structure near any suspension mounting.
1965333.33%Steering linkage component relative movement between components which should be fixed.
1966540%Excessive corrosion to, or weakened structure near any suspension mounting.
1967580%Stop lamps all missing or inoperative.
1968580%Direction indicator lamp missing or inoperative.
1969785.71%Parking brake efficiency well below minimum requirement.
1970683.33%Suspension joint dust cover missing or ineffective.
1971988.89%Steering rack gaiter or ball joint dust cover missing or damaged.
19722075%Number plate inscription missing or illegible.
19731275%Binding brake.
1974771.43%Direction indicator lamp missing or inoperative.
1975977.78%Suspension spring broken or seriously weakened.
1976450%Brake performance unable to be tested.
1977650%Shock absorber disfunctional or leaking severely.
1978875%Headlamp aim outwith limits.
1979666.67%Windscreen washers not providing sufficient fluid.
19801376.92%Stop lamps all missing or inoperative.
19812080%Windscreen washers not providing sufficient fluid.
19823351.52%Headlamp aim outwith limits.
19834362.79%Emissions levels exceed default limits.
19841776.47%Position lamp missing or inoperative.
198510%Wheel bearing with excessive play.
1986250%Position lamp missing or inoperative.
1987250%Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced.
19883100%n/a
19891100%n/a
19901100%n/a
199110%Brakes out of balance across an axle.
1992366.67%Exhaust system leaking or insecure.
19931100%n/a
1994366.67%Emissions levels exceed default limits.
199510%Shock absorber insecurely attached to chassis or axle.
19961100%n/a
19973100%n/a
1998650%Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced.
1999785.71%Body, cab or chassis excessively corroded at mounting points.
2000250%Abnormal lag in brake operation on a wheel.
20013100%n/a
2002475%Electrical wiring insecure.
200310%Brakes out of balance across an axle.
2004250%Tyre with a lump, bulge or tear.
2005250%Windscreen washers not providing sufficient fluid.
200810%Fog lamp switch not operating in accordance with the requirements.
20111100%n/a
20121100%n/a
2014366.67%Electrical wiring insecure.
201710%Position lamp missing or inoperative.
201810%Suspension pin, bush, joint or bearing excessively worn.
20211100%n/a

Tests: 310

Average Land Rover 109 pass rate: 68.39%

Most common fail reasons

#ReasonFail codeCategory%
1Position lamp missing or inoperative.4.2.1(a)(ii)Major17%
2Windscreen washers not providing sufficient fluid.3.5(a)Major15%
3Emissions levels exceed default limits.8.2.1.2(b)Major11%
4Electrical wiring insecure.4.11(a)(ii)Major10%
5Headlamp aim outwith limits.4.1.2(a)Major10%
6Excessive corrosion to, or weakened structure near any suspension mounting.5.3.6(a)(i)Major10%
7Direction indicator lamp missing or inoperative.4.4.1(a)(ii)Major9%
8Brakes out of balance across an axle.1.2.1(b)(i)Major9%
9Stop lamp missing or inoperative.4.3.1(a)(ii)Major8%
10Stop lamps all missing or inoperative.4.3.1(a)(iii)Dangerous6%
Tests date range:
10th February 2023 to 9th February 2024

Contains public sector information licensed under the Open Government Licence v3


Ad for Email Reminder