MOT Stats
Vehicle types : Car : Kia
Kia
| Model | Tests | Pass rate | Most common fail reason |
| Borrego | 1 | 0% | Position lamp missing or inoperative. |
| Carens | 16,171 | 64.01% | Suspension pin, bush, joint or bearing excessively worn. |
| Carnival | 10 | 40% | Door will not open using the relevant control or close properly. |
| Cee'd | 121,033 | 67.82% | Suspension pin, bush, joint or bearing excessively worn. |
| Cerato | 1,064 | 49.34% | Parking brake efficiency below minimum requirement. |
| Clarus | 3 | 66.67% | Seat belt load bearing structure strength significantly reduced near an anchorage point. |
| Elan | 2 | 100% | n/a |
| Forte | 12 | 50% | Fog lamp switch not operating in accordance with the requirements. |
| Magentis | 765 | 54.51% | Suspension pin, bush, joint or bearing excessively worn. |
| Mentor | 26 | 50% | Position lamp missing or inoperative. |
| Morning | 1 | 100% | n/a |
| Niro | 44,868 | 88.56% | Tyre with a lump, bulge or tear. |
| Optima | 11,508 | 80.08% | Brake lining or pad worn below 1.5mm. |
| Picanto | 177,324 | 71.72% | Position lamp missing or inoperative. |
| Pregio | 5 | 100% | n/a |
| Pride | 30 | 56.67% | Excessive corrosion to, or weakened structure near any suspension mounting. |
| Proceed | 4,606 | 74.03% | Wiper blade missing or not clearing the windscreen. |
| Rio | 97,909 | 69.94% | Suspension pin, bush, joint or bearing excessively worn. |
| Rondo | 2 | 50% | Electrical wiring insecure. |
| Sedona | 6,453 | 53.4% | Suspension pin, bush, joint or bearing excessively worn. |
| Shuma | 56 | 48.21% | Parking brake efficiency below minimum requirement. |
| Sorento | 36,425 | 69.12% | Suspension pin, bush, joint or bearing excessively worn. |
| Soul | 23,873 | 71.65% | Steering ball joint with excessive wear. |
| Spectra | 1 | 0% | Fog lamp inoperative or rear fog lamp missing. |
| Sportage | 251,842 | 77.74% | Tyre tread depth not in accordance with requirements. |
| Stinger | 1,969 | 87.91% | Tyre tread depth not in accordance with requirements. |
| Stonic | 19,698 | 89.51% | Wiper blade missing or not clearing the windscreen. |
| Venga | 47,790 | 74.21% | Steering ball joint with excessive wear. |
Tests: 863,447
Average Kia pass rate: 73.87%
Most common fail reasons
| # | Reason | Fail code | Category | % |
| 1 | Wiper blade missing or not clearing the windscreen. | 3.4(b)(ii) | Major | 11% |
| 2 | Suspension pin, bush, joint or bearing excessively worn. | 5.3.4(a)(i) | Major | 11% |
| 3 | Tyre tread depth not in accordance with requirements. | 5.2.3(e) | Dangerous | 11% |
| 4 | Position lamp missing or inoperative. | 4.2.1(a)(ii) | Major | 9% |
| 5 | Brake lining or pad worn below 1.5mm. | 1.1.13(a)(ii) | Dangerous | 9% |
| 6 | Windscreen washers not providing sufficient fluid. | 3.5(a) | Major | 9% |
| 7 | Tyre with a lump, bulge or tear. | 5.2.3(d)(ii) | Dangerous | 9% |
| 8 | Steering ball joint with excessive wear. | 2.1.3(b)(i) | Major | 8% |
| 9 | Parking brake efficiency below minimum requirement. | 1.4.2(a)(i) | Major | 7% |
| 10 | Headlamp aim outwith limits. | 4.1.2(a) | Major | 7% |
Tests date range:
23rd September 2022 to 22nd September 2023
Contains public sector information licensed under the Open Government Licence v3
Share 
