MOT Stats


Vehicle types : Car : Jaguar : Mk II

Jaguar Mk II

YearTestsPass rateMost common fail reason
19571100%n/a
19593100%n/a
19601984.21%Fuel system leaking excessively or a risk of fire.
19613387.88%Suspension pin, bush, joint or bearing excessively worn.
19622085%Position lamp missing or inoperative.
19632878.57%Electrical wiring insecure.
19642386.96%Steering linkage component relative movement between components which should be fixed.
19652792.59%Windscreen washers not providing sufficient fluid.
19663694.44%Windscreen washers not providing sufficient fluid.
19673287.5%Door will not open using the relevant control or close properly.
19682986.21%Windscreen washers not providing sufficient fluid.
1969366.67%Excessive corrosion to, or weakened structure near any suspension mounting.
197510%Driver's seat insecure.
19782100%n/a
19795100%n/a
19802100%n/a
19813100%n/a
19822100%n/a
19832100%n/a
19843100%n/a
19851100%n/a
19861100%n/a
19871100%n/a
19883100%n/a
19892100%n/a
1990580%Emissions levels exceed default limits.
1991580%Brake efficiency well below minimum requirement.
1992333.33%Windscreen washers not providing sufficient fluid.
19943100%n/a
19963100%n/a
19972100%n/a
19982100%n/a
19994100%n/a
2000366.67%Binding brake.
20013100%n/a
2002250%Wiper blade missing or not clearing the windscreen.
2003250%Electrical wiring insecure.
20042100%n/a
20051100%n/a
20071100%n/a
20081100%n/a
20091100%n/a
20102100%n/a
20111100%n/a
20121100%n/a
20131100%n/a
20141100%n/a
20152100%n/a
20162100%n/a
20172100%n/a
20183100%n/a

Tests: 340

Average Jaguar Mk II pass rate: 88.24%

Most common fail reasons

#ReasonFail codeCategory%
1Windscreen washers not providing sufficient fluid.3.5(a)Major33%
2Electrical wiring insecure.4.11(a)(ii)Major18%
3Suspension pin, bush, joint or bearing excessively worn.5.3.4(a)(i)Major18%
4Position lamp missing or inoperative.4.2.1(a)(ii)Major13%
5Suspension joint dust cover missing or ineffective.5.3.4(b)(ii)Major13%
6Steering rack gaiter or ball joint dust cover missing or damaged.2.1.3(g)(ii)Major10%
7Stop lamp missing or inoperative.4.3.1(a)(ii)Major10%
8Door will not open using the relevant control or close properly.6.2.3(a)Major8%
9Headlamp aim unable to be tested.4.1.2(b)Major8%
10Stop lamps all missing or inoperative.4.3.1(a)(iii)Dangerous8%
Tests date range:
10th February 2023 to 9th February 2024

Contains public sector information licensed under the Open Government Licence v3


Ad for Email Reminder