MOT Stats
Vehicle types : Car : Isuzu : Trooper
Isuzu Trooper
Year | Tests | Pass rate | Most common fail reason |
1968 | 1 | 100% | n/a |
1987 | 1 | 100% | n/a |
1988 | 3 | 66.67% | Parking brake efficiency below minimum requirement. |
1989 | 7 | 57.14% | Brake pipe is at imminent risk of failure or fracture. |
1990 | 5 | 80% | Excessive corrosion to, or weakened structure near any suspension mounting. |
1991 | 11 | 81.82% | Suspension pin, bush, joint or bearing excessively worn. |
1992 | 36 | 66.67% | Parking brake efficiency below minimum requirement. |
1993 | 59 | 72.88% | Brake efficiency below minimum requirement. |
1994 | 58 | 68.97% | Body, cab or chassis excessively corroded at mounting points. |
1995 | 56 | 67.86% | Position lamp missing or inoperative. |
1996 | 98 | 62.24% | Constant velocity joint boot missing, split, insecure or no longer prevents the ingress of dirt. |
1997 | 224 | 62.05% | Constant velocity joint boot missing, split, insecure or no longer prevents the ingress of dirt. |
1998 | 237 | 60.76% | Constant velocity joint boot missing, split, insecure or no longer prevents the ingress of dirt. |
1999 | 263 | 56.27% | Position lamp missing or inoperative. |
2000 | 217 | 58.53% | Windscreen washers not providing sufficient fluid. |
2001 | 217 | 59.91% | Exhaust system leaking or insecure. |
2002 | 377 | 58.62% | Constant velocity joint boot missing, split, insecure or no longer prevents the ingress of dirt. |
2003 | 285 | 60.35% | Suspension pin, bush, joint or bearing excessively worn. |
2004 | 276 | 66.67% | Position lamp missing or inoperative. |
2005 | 182 | 56.59% | Exhaust system leaking or insecure. |
2006 | 40 | 55% | Seat belt load bearing structure strength significantly reduced near an anchorage point. |
2007 | 7 | 71.43% | Fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. |
2008 | 3 | 66.67% | Leaking brake pipe or connection on a hydraulic system. |
2009 | 2 | 0% | Parking brake efficiency well below minimum requirement. |
2010 | 2 | 0% | Electrical wiring insecure. |
2011 | 1 | 100% | n/a |
2012 | 3 | 66.67% | Brake actuator has no reserve travel. |
2013 | 1 | 100% | n/a |
2015 | 1 | 100% | n/a |
2020 | 1 | 0% | Engine MIL inoperative or indicating a malfunction. |
Tests: 2,674
Average Isuzu Trooper pass rate: 60.92%
Most common fail reasons
# | Reason | Fail code | Category | % |
1 | Constant velocity joint boot missing, split, insecure or no longer prevents the ingress of dirt. | 6.1.7(g)(ii) | Major | 19% |
2 | Suspension pin, bush, joint or bearing excessively worn. | 5.3.4(a)(i) | Major | 15% |
3 | Position lamp missing or inoperative. | 4.2.1(a)(ii) | Major | 13% |
4 | Exhaust system leaking or insecure. | 6.1.2(a) | Major | 13% |
5 | Windscreen washers not providing sufficient fluid. | 3.5(a) | Major | 11% |
6 | Brake pipe damaged or excessively corroded. | 1.1.11(c) | Major | 9% |
7 | Wiper blade missing or not clearing the windscreen. | 3.4(b)(ii) | Major | 9% |
8 | Binding brake. | 1.2.1(f) | Major | 8% |
9 | Brake efficiency below minimum requirement. | 1.2.2(a)(i) | Major | 8% |
10 | Body, cab or chassis excessively corroded at mounting points. | 6.2.2(d)(i) | Major | 8% |
Tests date range:
10th February 2023 to 9th February 2024
Contains public sector information licensed under the Open Government Licence v3