MOT Stats
Vehicle types : Car : Infiniti
Infiniti
Model | Tests | Pass rate | Most common fail reason |
EX | 133 | 76.69% | Engine MIL inoperative or indicating a malfunction. |
EX35 | 1 | 0% | Position lamp missing or inoperative. |
EX37 | 1 | 0% | Excessive fluctuation in brake effort through each wheel revolution. |
FX | 452 | 81.42% | Position lamp missing or inoperative. |
FX35 | 2 | 100% | n/a |
FX45 | 2 | 100% | n/a |
G | 148 | 81.76% | Position lamp missing or inoperative. |
G35 | 2 | 0% | Wheel bearing with excessive play. |
G37 | 33 | 81.82% | Tyre pressure monitoring system malfunctioning or not working |
M | 199 | 80.4% | Brake lining or pad worn below 1.5mm. |
M30D | 24 | 75% | Parking brake efficiency below minimum requirement. |
M35 | 2 | 100% | n/a |
M37 | 6 | 66.67% | Headlamp beam image obviously incorrect. |
MPV | 1 | 100% | n/a |
Q30 | 4,846 | 88.36% | Tyre with a lump, bulge or tear. |
Q45 | 1 | 0% | Loose or missing wheel nut, bolt or stud. |
Q50 | 2,636 | 80.01% | Brake lining or pad worn below 1.5mm. |
Q60 | 182 | 90.66% | Tyre tread depth not in accordance with requirements. |
Q70 | 396 | 84.34% | Brake lining or pad worn below 1.5mm. |
QX30 | 303 | 94.06% | Position lamp missing or inoperative. |
QX50 | 77 | 85.71% | Tyre with a lump, bulge or tear. |
QX56 | 1 | 0% | Direction indicator lamp emitted colour, position or intensity not in accordance with requirements. |
QX70 | 431 | 87.47% | Tyre tread depth not in accordance with requirements. |
Tests: 9,879
Average Infiniti pass rate: 85.28%
Most common fail reasons
# | Reason | Fail code | Category | % |
1 | Brake lining or pad worn below 1.5mm. | 1.1.13(a)(ii) | Dangerous | 15% |
2 | Tyre tread depth not in accordance with requirements. | 5.2.3(e) | Dangerous | 14% |
3 | Tyre with a lump, bulge or tear. | 5.2.3(d)(ii) | Dangerous | 13% |
4 | Wiper blade missing or not clearing the windscreen. | 3.4(b)(ii) | Major | 8% |
5 | Windscreen washers not providing sufficient fluid. | 3.5(a) | Major | 7% |
6 | Headlamp aim outwith limits. | 4.1.2(a) | Major | 6% |
7 | Tyre with a cut in excess of the requirements. | 5.2.3(d)(i) | Major | 6% |
8 | Suspension pin, bush, joint or bearing excessively worn. | 5.3.4(a)(i) | Major | 5% |
9 | Position lamp missing or inoperative. | 4.2.1(a)(ii) | Major | 5% |
10 | Tyre pressure monitoring system malfunctioning or not working | 5.2.3(h) | Major | 4% |
Tests date range:
18th June 2021 to 17th June 2022
Contains public sector information licensed under the Open Government Licence v3