MOT Stats
Vehicle types : Car : Hyundai : Veloster
Hyundai Veloster
| Year | Tests | Pass rate | Most common fail reason |
| 2011 | 14 | 64.29% | Tyre tread depth not in accordance with requirements. |
| 2012 | 1,462 | 62.18% | Steering ball joint with excessive wear. |
| 2013 | 858 | 59.91% | Steering ball joint with excessive wear. |
| 2014 | 144 | 64.58% | Steering ball joint with excessive wear. |
| 2015 | 25 | 56% | Suspension joint dust cover missing or ineffective. |
| 2016 | 4 | 75% | Tyre with a lump, bulge or tear. |
| 2017 | 2 | 50% | Brake lining or pad worn below 1.5mm. |
| 2018 | 4 | 75% | Windscreen washers not providing sufficient fluid. |
| 2019 | 4 | 50% | Fog lamp switch not operating in accordance with the requirements. |
| 2020 | 1 | 100% | n/a |
Tests: 2,518
Average Hyundai Veloster pass rate: 61.52%
Most common fail reasons
| # | Reason | Fail code | Category | % |
| 1 | Steering ball joint with excessive wear. | 2.1.3(b)(i) | Major | 21% |
| 2 | Parking brake efficiency below minimum requirement. | 1.4.2(a)(i) | Major | 13% |
| 3 | Suspension joint dust cover missing or ineffective. | 5.3.4(b)(ii) | Major | 12% |
| 4 | Tyre tread depth not in accordance with requirements. | 5.2.3(e) | Dangerous | 12% |
| 5 | Electrical wiring insecure. | 4.11(a)(ii) | Major | 12% |
| 6 | Windscreen washers not providing sufficient fluid. | 3.5(a) | Major | 11% |
| 7 | Tyre with a lump, bulge or tear. | 5.2.3(d)(ii) | Dangerous | 10% |
| 8 | Suspension spring broken or seriously weakened. | 5.3.1(b)(i) | Major | 9% |
| 9 | Parking brake inoperative on one side. | 1.4.1(a) | Major | 8% |
| 10 | Suspension pin, bush, joint or bearing excessively worn. | 5.3.4(a)(i) | Major | 8% |
Tests date range:
10th February 2023 to 9th February 2024
Contains public sector information licensed under the Open Government Licence v3
Share 
