MOT Stats


Vehicle types : Car : Honda : Prelude

Honda Prelude

YearTestsPass rateMost common fail reason
1982250%Engine MIL inoperative or indicating a malfunction.
19833100%n/a
1984366.67%Binding brake.
19855100%n/a
1986666.67%Stop lamp missing or inoperative.
1987333.33%Tyre with a cut in excess of the requirements.
19881770.59%Suspension pin, bush, joint or bearing excessively worn.
19893354.55%Registration plate lamp missing or inoperative.
19903287.5%Wiper blade missing or not clearing the windscreen.
19914475%Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced.
19923666.67%Constant velocity joint boot missing, split, insecure or no longer prevents the ingress of dirt.
19932466.67%Anti-lock braking system warning device shows system malfunction.
19942272.73%Headlamp beam image obviously incorrect.
19953467.65%Excessive corrosion to, or weakened structure near any suspension mounting.
19962458.33%Excessive corrosion to, or weakened structure near any suspension mounting.
199714268.31%Steering rack gaiter or ball joint dust cover missing or damaged.
199817462.64%Excessive corrosion to, or weakened structure near any suspension mounting.
199916467.07%Binding brake.
200016457.93%Wiper blade missing or not clearing the windscreen.
20011154.55%Fuel system leaking, or missing or ineffective filler cap.
2002862.5%Emissions levels exceed the manufacturer's specified limits.
20031100%n/a
2004771.43%Suspension spring with an unsafe modification.
2005666.67%Parking brake lever has excessive movement.
20061100%n/a
20071163.64%Electrical wiring insecure.
2008666.67%Engine MIL inoperative or indicating a malfunction.
200910%Steering rack gaiter or ball joint dust cover missing or damaged.
2011250%Fog lamp likely to become detached.
20132100%n/a
201410%Brakes out of balance across an axle.
201510%Fog lamp inoperative or rear fog lamp missing.
20191100%n/a
2020366.67%Windscreen washers not providing sufficient fluid.
20221100%n/a

Tests: 995

Average Honda Prelude pass rate: 65.43%

Most common fail reasons

#ReasonFail codeCategory%
1Excessive corrosion to, or weakened structure near any suspension mounting.5.3.6(a)(i)Major13%
2Parking brake efficiency below minimum requirement.1.4.2(a)(i)Major13%
3Binding brake.1.2.1(f)Major9%
4Steering rack gaiter or ball joint dust cover missing or damaged.2.1.3(g)(ii)Major9%
5Suspension pin, bush, joint or bearing excessively worn.5.3.4(a)(i)Major9%
6Windscreen washers not providing sufficient fluid.3.5(a)Major9%
7Emissions levels exceed default limits.8.2.1.2(b)Major9%
8Wiper blade missing or not clearing the windscreen.3.4(b)(ii)Major9%
9Emissions levels exceed the manufacturer's specified limits.8.2.1.2(a)Major9%
10Emissions lambda coefficient outwith limits.8.2.1.2(c)Major8%
Tests date range:
10th February 2023 to 9th February 2024

Contains public sector information licensed under the Open Government Licence v3


Ad for Email Reminder