MOT Stats
Vehicle types : Car : Ford : Granada
Ford Granada
Year | Tests | Pass rate | Most common fail reason |
1972 | 1 | 100% | n/a |
1973 | 4 | 100% | n/a |
1974 | 11 | 100% | n/a |
1975 | 6 | 83.33% | Excessive corrosion to, or weakened structure near any suspension mounting. |
1976 | 11 | 100% | n/a |
1977 | 16 | 81.25% | Exhaust system leaking or insecure. |
1978 | 3 | 100% | n/a |
1979 | 8 | 50% | Stop lamps all missing or inoperative. |
1980 | 10 | 90% | Electrical wiring insecure. |
1981 | 8 | 87.5% | Abnormal lag in brake operation on a wheel. |
1982 | 28 | 89.29% | Parking brake efficiency well below minimum requirement. |
1983 | 91 | 80.22% | Electrical wiring insecure. |
1984 | 112 | 87.5% | Suspension pin, bush, joint or bearing excessively worn. |
1985 | 102 | 85.29% | Windscreen washers not providing sufficient fluid. |
1986 | 15 | 60% | Excessive corrosion to, or weakened structure near any suspension mounting. |
1987 | 22 | 77.27% | Tyre with a lump, bulge or tear. |
1988 | 22 | 77.27% | Suspension pin, bush, joint or bearing excessively worn. |
1989 | 28 | 78.57% | Exhaust system leaking or insecure. |
1990 | 43 | 69.77% | Seat belt load bearing structure strength significantly reduced near an anchorage point. |
1991 | 42 | 64.29% | Constant velocity joint boot missing, split, insecure or no longer prevents the ingress of dirt. |
1992 | 46 | 82.61% | Excessive corrosion to, or weakened structure near any suspension mounting. |
1993 | 51 | 68.63% | Headlamp aim outwith limits. |
1994 | 75 | 81.33% | Brake pipe damaged or excessively corroded. |
1995 | 8 | 50% | Seat belt load bearing structure strength significantly reduced near an anchorage point. |
1998 | 1 | 100% | n/a |
2002 | 1 | 0% | Fuel tank, pipe or hose insecure such that there is a risk of fire. |
2004 | 1 | 100% | n/a |
2005 | 1 | 0% | Wiper blade missing or not clearing the windscreen. |
2014 | 1 | 100% | n/a |
2017 | 1 | 100% | n/a |
2019 | 1 | 100% | n/a |
2021 | 2 | 100% | n/a |
Tests: 772
Average Ford Granada pass rate: 80.05%
Most common fail reasons
# | Reason | Fail code | Category | % |
1 | Excessive corrosion to, or weakened structure near any suspension mounting. | 5.3.6(a)(i) | Major | 17% |
2 | Seat belt load bearing structure strength significantly reduced near an anchorage point. | 7.1.1(a)(i) | Major | 12% |
3 | Electrical wiring insecure. | 4.11(a)(ii) | Major | 12% |
4 | Suspension pin, bush, joint or bearing excessively worn. | 5.3.4(a)(i) | Major | 10% |
5 | Wiper blade missing or not clearing the windscreen. | 3.4(b)(ii) | Major | 10% |
6 | Windscreen washers not providing sufficient fluid. | 3.5(a) | Major | 9% |
7 | Constant velocity joint boot missing, split, insecure or no longer prevents the ingress of dirt. | 6.1.7(g)(ii) | Major | 8% |
8 | Emissions levels exceed default limits. | 8.2.1.2(b) | Major | 8% |
9 | Headlamp aim outwith limits. | 4.1.2(a) | Major | 8% |
10 | Position lamp missing or inoperative. | 4.2.1(a)(ii) | Major | 8% |
Tests date range:
10th February 2023 to 9th February 2024
Contains public sector information licensed under the Open Government Licence v3