MOT Stats
Vehicle types : Car : Enzo Design
Enzo Design
Model | Tests | Pass rate | Most common fail reason |
F430 | 1 | 0% | Brakes excessively out of balance across an axle. |
Tests: 1
Average Enzo Design pass rate: 0%
Most common fail reasons
# | Reason | Fail code | Category | % |
1 | Brakes excessively out of balance across an axle. | 1.2.1(b)(ii) | Dangerous | 100% |
2 | Suspension component fractured or likely to fail. | 5.3.3(b)(ii) | Dangerous | 100% |
3 | Parking brake efficiency well below minimum requirement. | 1.4.2(a)(ii) | Dangerous | 100% |
4 | Door will not open using the relevant control or close properly. | 6.2.3(a) | Major | 100% |
5 | Parking brake inoperative on one side. | 1.4.1(a) | Major | 100% |
6 | Emissions levels exceed default limits. | 8.2.1.2(b) | Major | 100% |
7 | Emissions lambda coefficient outwith limits. | 8.2.1.2(c) | Major | 100% |
8 | Emission control equipment fitted by the manufacturer missing, modified or defective. | 8.2.1.1(a) | Major | 100% |
9 | Headlamp aim outwith limits. | 4.1.2(a) | Major | 100% |
10 | Suspension joint dust cover missing or ineffective. | 5.3.4(b)(ii) | Major | 100% |
Tests date range:
23rd September 2022 to 22nd September 2023
Contains public sector information licensed under the Open Government Licence v3