MOT Stats
Vehicle types : Car : Daimler : V8
Daimler V8
Year | Tests | Pass rate | Most common fail reason |
1960 | 1 | 100% | n/a |
1963 | 6 | 83.33% | Windscreen washers not providing sufficient fluid. |
1964 | 8 | 100% | n/a |
1965 | 7 | 100% | n/a |
1966 | 4 | 100% | n/a |
1967 | 11 | 81.82% | Position lamp missing or inoperative. |
1968 | 20 | 85% | Windscreen washers not providing sufficient fluid. |
1969 | 14 | 92.86% | Stop lamps all missing or inoperative. |
1970 | 2 | 100% | n/a |
1974 | 1 | 100% | n/a |
1977 | 1 | 100% | n/a |
1978 | 1 | 100% | n/a |
1979 | 1 | 100% | n/a |
1980 | 1 | 0% | Wheel bearing with excessive play. |
1982 | 1 | 100% | n/a |
1983 | 1 | 100% | n/a |
1984 | 1 | 100% | n/a |
1985 | 2 | 100% | n/a |
1987 | 2 | 50% | Wiper not operating, or missing. |
1988 | 5 | 80% | Anti-lock braking system warning device shows system malfunction. |
1989 | 2 | 0% | Door will not open using the relevant control or close properly. |
1990 | 6 | 83.33% | Headlamp aim outwith limits. |
1991 | 4 | 50% | Position lamp missing or inoperative. |
1992 | 3 | 100% | n/a |
1993 | 1 | 100% | n/a |
1994 | 7 | 85.71% | Windscreen washers not providing sufficient fluid. |
1995 | 13 | 84.62% | Excessive movement of centre of steering wheel up or down. |
1996 | 12 | 83.33% | Body, cab or chassis excessively corroded at mounting points. |
1997 | 23 | 69.57% | Excessive corrosion to, or weakened structure near any suspension mounting. |
1998 | 67 | 67.16% | Excessive corrosion to, or weakened structure near any suspension mounting. |
1999 | 33 | 60.61% | Excessive corrosion to, or weakened structure near any suspension mounting. |
2000 | 22 | 81.82% | Excessive corrosion to, or weakened structure near any suspension mounting. |
2001 | 39 | 74.36% | Windscreen washers not providing sufficient fluid. |
2002 | 16 | 62.5% | Suspension spring broken or seriously weakened. |
2003 | 6 | 50% | Emissions levels exceed the manufacturer's specified limits. |
2004 | 1 | 0% | Driver's seat insecure. |
2005 | 1 | 0% | Driver's seat fore and aft adjustment mechanism not working as intended. |
2006 | 3 | 33.33% | Brake lining or pad worn below 1.5mm. |
2007 | 3 | 100% | n/a |
2008 | 1 | 100% | n/a |
2009 | 2 | 100% | n/a |
2010 | 3 | 66.67% | Suspension pin, bush, joint or bearing excessively worn. |
2012 | 1 | 100% | n/a |
2016 | 2 | 100% | n/a |
2017 | 1 | 100% | n/a |
Tests: 362
Average Daimler V8 pass rate: 75.14%
Most common fail reasons
# | Reason | Fail code | Category | % |
1 | Excessive corrosion to, or weakened structure near any suspension mounting. | 5.3.6(a)(i) | Major | 19% |
2 | Windscreen washers not providing sufficient fluid. | 3.5(a) | Major | 16% |
3 | Suspension pin, bush, joint or bearing excessively worn. | 5.3.4(a)(i) | Major | 11% |
4 | Position lamp missing or inoperative. | 4.2.1(a)(ii) | Major | 10% |
5 | Suspension spring broken or seriously weakened. | 5.3.1(b)(i) | Major | 10% |
6 | Emissions lambda coefficient outwith limits. | 8.2.1.2(c) | Major | 10% |
7 | Emissions levels exceed default limits. | 8.2.1.2(b) | Major | 9% |
8 | Exhaust system leaking or insecure. | 6.1.2(a) | Major | 7% |
9 | SRS malfunction indicator lamp indicates a system malfunction. | 7.1.6(a) | Major | 6% |
10 | Seat belt load bearing structure strength significantly reduced near an anchorage point. | 7.1.1(a)(i) | Major | 6% |
Tests date range:
10th February 2023 to 9th February 2024
Contains public sector information licensed under the Open Government Licence v3