MOT Stats
Vehicle types : Car : Audi : S8
Audi S8
| Year | Tests | Pass rate | Most common fail reason |
| 1997 | 1 | 100% | n/a |
| 1998 | 9 | 77.78% | Windscreen washers not providing sufficient fluid. |
| 1999 | 4 | 100% | n/a |
| 2000 | 6 | 66.67% | Steering rack gaiter or ball joint dust cover missing or damaged. |
| 2001 | 10 | 70% | Constant velocity joint boot missing, split, insecure or no longer prevents the ingress of dirt. |
| 2002 | 26 | 61.54% | Tyre not fitted in compliance with the manufacturer's instructions. |
| 2003 | 2 | 100% | n/a |
| 2004 | 1 | 100% | n/a |
| 2006 | 19 | 94.74% | Fracture or welding defect on a wheel. |
| 2007 | 26 | 80.77% | Engine MIL inoperative or indicating a malfunction. |
| 2008 | 26 | 88.46% | Windscreen washers not providing sufficient fluid. |
| 2009 | 5 | 60% | Emissions levels exceed the manufacturer's specified limits. |
| 2010 | 3 | 100% | n/a |
| 2012 | 7 | 71.43% | Tyre with a lump, bulge or tear. |
| 2013 | 16 | 93.75% | Brake lining or pad worn below 1.5mm. |
| 2014 | 13 | 100% | n/a |
| 2015 | 5 | 80% | Number plate does not conform to requirements. |
| 2016 | 3 | 100% | n/a |
| 2017 | 1 | 100% | n/a |
| 2018 | 3 | 66.67% | Suspension pin, bush, joint or bearing excessively worn. |
| 2020 | 23 | 86.96% | Tyre with a cut in excess of the requirements. |
| 2021 | 5 | 100% | n/a |
Tests: 214
Average Audi S8 pass rate: 83.18%
Most common fail reasons
| # | Reason | Fail code | Category | % |
| 1 | Constant velocity joint boot missing, split, insecure or no longer prevents the ingress of dirt. | 6.1.7(g)(ii) | Major | 17% |
| 2 | Tyre with a lump, bulge or tear. | 5.2.3(d)(ii) | Dangerous | 17% |
| 3 | Windscreen washers not providing sufficient fluid. | 3.5(a) | Major | 14% |
| 4 | Suspension pin, bush, joint or bearing excessively worn. | 5.3.4(a)(i) | Major | 8% |
| 5 | Steering rack gaiter or ball joint dust cover missing or damaged. | 2.1.3(g)(ii) | Major | 6% |
| 6 | Registration plate lamp missing or inoperative. | 4.7.1(b)(ii) | Major | 6% |
| 7 | Tyre with a cut in excess of the requirements. | 5.2.3(d)(i) | Major | 6% |
| 8 | Tyre not fitted in compliance with the manufacturer's instructions. | 5.2.3(i) | Major | 6% |
| 9 | Engine MIL inoperative or indicating a malfunction. | 8.2.1.2(h) | Major | 6% |
| 10 | Parking brake efficiency below minimum requirement. | 1.4.2(a)(i) | Major | 6% |
Tests date range:
10th February 2023 to 9th February 2024
Contains public sector information licensed under the Open Government Licence v3
Share 
