MOT Stats


Vehicle types : Car : Audi : Quattro

Audi Quattro

YearTestsPass rateMost common fail reason
19813100%n/a
19822100%n/a
19832889.29%Rear fog lamp adversely affected by the operation of any other lamp.
19844182.93%Emissions levels exceed default limits.
19856185.25%Windscreen washers not providing sufficient fluid.
19865585.45%Emissions levels exceed default limits.
19874591.11%Anti-lock braking system warning device shows system malfunction.
19886785.07%Headlamp aim outwith limits.
19893979.49%Emissions levels exceed default limits.
19904785.11%Position lamp missing or inoperative.
19912085%Windscreen washers not providing sufficient fluid.
1992771.43%Steering ball joint with excessive wear.
1993785.71%Direction indicator lamp missing or inoperative.
19944100%n/a
1995560%Stop lamps all missing or inoperative.
19961100%n/a
19971100%n/a
20002100%n/a
200120%Emissions levels exceed the manufacturer's specified limits.
20021040%Suspension spring broken or seriously weakened.
2003966.67%Brake disc or drum insecure, fractured or otherwise likely to fail.
20041376.92%Tyre tread depth not in accordance with requirements.
20055100%n/a
2006520%Suspension pin, bush, joint or bearing excessively worn.
2007580%Tyre tread depth not in accordance with requirements.
2008742.86%Suspension pin, bush, joint or bearing excessively worn.
2009875%Headlamp aim outwith limits.
2010580%Brake lining or pad worn below 1.5mm.
2011450%Number plate does not conform to requirements.
2012366.67%Tyre tread depth not in accordance with requirements.
20131100%n/a
2014366.67%Body, cab or chassis excessively corroded at mounting points.
2015475%Emissions lambda coefficient outwith limits.
20164100%n/a
20172100%n/a
20181100%n/a
20202100%n/a

Tests: 528

Average Audi Quattro pass rate: 82.01%

Most common fail reasons

#ReasonFail codeCategory%
1Emissions levels exceed default limits.8.2.1.2(b)Major20%
2Windscreen washers not providing sufficient fluid.3.5(a)Major16%
3Position lamp missing or inoperative.4.2.1(a)(ii)Major13%
4Suspension pin, bush, joint or bearing excessively worn.5.3.4(a)(i)Major12%
5Headlamp aim outwith limits.4.1.2(a)Major9%
6Steering rack gaiter or ball joint dust cover missing or damaged.2.1.3(g)(ii)Major7%
7Parking brake efficiency below minimum requirement.1.4.2(a)(i)Major7%
8Binding brake.1.2.1(f)Major7%
9Steering ball joint with excessive wear.2.1.3(b)(i)Major7%
10Tyre tread depth not in accordance with requirements.5.2.3(e)Dangerous6%
Tests date range:
10th February 2023 to 9th February 2024

Contains public sector information licensed under the Open Government Licence v3


Ad for Email Reminder