MOT Stats

Audi 80

Year	Tests	Pass rate	Most common fail reason
1968	1	100%	n/a
1975	3	33.33%	Brakes out of balance across an axle.
1981	1	100%	n/a
1982	4	75%	Brakes out of balance across an axle.
1983	7	85.71%	Horn not working.
1984	26	80.77%	Exhaust system leaking or insecure.
1985	21	66.67%	Constant velocity joint boot missing, split, insecure or no longer prevents the ingress of dirt.
1986	19	84.21%	Excessive corrosion to, or weakened structure near any suspension mounting.
1987	5	60%	Excessive fluctuation in brake effort through each wheel revolution.
1988	16	50%	Stop lamp missing or inoperative.
1989	14	100%	n/a
1990	24	58.33%	Direction indicator lamp missing or inoperative.
1991	34	64.71%	Fog lamp inoperative or rear fog lamp missing.
1992	69	56.52%	Parking brake efficiency below minimum requirement.
1993	123	60.16%	Suspension pin, bush, joint or bearing excessively worn.
1994	258	65.5%	Suspension pin, bush, joint or bearing excessively worn.
1995	114	64.04%	Suspension pin, bush, joint or bearing excessively worn.
1996	3	33.33%	Emissions levels exceed the manufacturer's specified limits.
1997	32	71.88%	Headlamp aim outwith limits.
1998	29	72.41%	Position lamp missing or inoperative.
1999	39	71.79%	Suspension pin, bush, joint or bearing excessively worn.
2000	18	72.22%	Steering rack gaiter or ball joint dust cover missing or damaged.
2001	2	50%	Suspension joint dust cover missing or ineffective.
2002	2	100%	n/a
2005	1	100%	n/a
2007	2	100%	n/a
2008	3	33.33%	Registration plate lamp missing or inoperative.
2010	1	100%	n/a
2012	1	100%	n/a
2013	1	100%	n/a
2016	1	100%	n/a
2017	1	100%	n/a
2018	2	50%	Suspension joint dust cover missing or ineffective.
2020	1	100%	n/a

Tests: 878

Average Audi 80 pass rate: 65.95%

Most common fail reasons

#	Reason	Fail code	Category	%
1	Suspension pin, bush, joint or bearing excessively worn.	5.3.4(a)(i)	Major	16%
2	Fog lamp inoperative or rear fog lamp missing.	4.5.1(a)(ii)	Major	13%
3	Constant velocity joint boot missing, split, insecure or no longer prevents the ingress of dirt.	6.1.7(g)(ii)	Major	13%
4	Parking brake efficiency below minimum requirement.	1.4.2(a)(i)	Major	11%
5	Windscreen washers not providing sufficient fluid.	3.5(a)	Major	11%
6	Headlamp aim outwith limits.	4.1.2(a)	Major	10%
7	Emissions levels exceed default limits.	8.2.1.2(b)	Major	10%
8	Position lamp missing or inoperative.	4.2.1(a)(ii)	Major	9%
9	Emissions levels exceed the manufacturer's specified limits.	8.2.1.2(a)	Major	8%
10	Exhaust system leaking or insecure.	6.1.2(a)	Major	7%

Tests date range:

10th February 2023 to 9th February 2024

Contains public sector information licensed under the Open Government Licence v3