MOT Stats

Peugeot Autosleeper

Year	Tests	Pass rate	Most common fail reason
1996	2	0%	Body, cab or chassis excessively corroded at mounting points.
1997	1	100%	n/a
1999	1	0%	Windscreen washers not providing sufficient fluid.
2000	2	50%	Position lamp missing or inoperative.
2002	1	0%	Parking brake efficiency below minimum requirement.
2003	1	100%	n/a
2004	4	100%	n/a
2005	1	100%	n/a
2007	1	100%	n/a
2008	1	100%	n/a
2009	3	100%	n/a
2010	2	100%	n/a
2011	2	50%	Windscreen washers not providing sufficient fluid.
2012	2	100%	n/a
2013	4	75%	Registration plate lamp missing or inoperative.
2014	2	100%	n/a
2015	2	100%	n/a
2016	7	85.71%	Tyre with a lump, bulge or tear.
2017	4	100%	n/a
2018	2	100%	n/a
2019	1	100%	n/a
2020	2	100%	n/a

Tests: 48

Average Peugeot Autosleeper pass rate: 83.33%

Most common fail reasons

#	Reason	Fail code	Category	%
1	Tyre with a lump, bulge or tear.	5.2.3(d)(ii)	Dangerous	25%
2	Windscreen washers not providing sufficient fluid.	3.5(a)	Major	25%
3	Position lamp missing or inoperative.	4.2.1(a)(ii)	Major	13%
4	Seat belt load bearing structure strength significantly reduced near an anchorage point.	7.1.1(a)(i)	Major	13%
5	Excessive corrosion to, or weakened structure near any suspension mounting.	5.3.6(a)(i)	Major	13%
6	Body, cab or chassis excessively corroded at mounting points.	6.2.2(d)(i)	Major	13%
7	Parking brake efficiency below minimum requirement.	1.4.2(a)(i)	Major	13%
8	Structural member modified or inadequately repaired such that the rigidity of the assembly is significantly reduced .	6.1.1(d)(i)	Major	13%
9	Registration plate lamp missing or inoperative.	4.7.1(b)(ii)	Major	13%
10	n/a	n/a	n/a	n/a

Tests date range:

10th February 2023 to 9th February 2024

Contains public sector information licensed under the Open Government Licence v3