MOT Stats
Vehicle types : Bike : Piaggio : B125
Piaggio B125
| Year | Tests | Pass rate | Most common fail reason |
| 1984 | 1 | 100% | n/a |
| 2001 | 1 | 100% | n/a |
| 2002 | 13 | 76.92% | Suspension pin, bush or joint: excessively worn. |
| 2003 | 11 | 90.91% | Rear registration plate lamp or light source missing or inoperative. |
| 2004 | 11 | 90.91% | Headlamp Beam image obviously incorrect. |
| 2005 | 3 | 33.33% | Brake lining or pad worn below 1.0mm. |
| 2006 | 2 | 50% | Tyre tread depth too low. |
| 2008 | 2 | 50% | Wheel bearing play so excessive it is likely to break up or directional control impaired. |
| 2013 | 1 | 100% | n/a |
Tests: 45
Average Piaggio B125 pass rate: 80%
Most common fail reasons
| # | Reason | Fail code | Category | % |
| 1 | Stop lamp remains on when the brakes are released. | 4.3.2(a)(iii) | Dangerous | 22% |
| 2 | Tyre tread depth too low. | 5.2.3(e) | Dangerous | 22% |
| 3 | Suspension pin, bush or joint: excessively worn. | 5.3.4(a)(i) | Major | 22% |
| 4 | Wheel bearing play so excessive it is likely to break up or directional control impaired. | 5.1.3(a)(ii) | Dangerous | 11% |
| 5 | Headlamp Beam image obviously incorrect. | 4.1.2(c) | Major | 11% |
| 6 | Tyre with a cut in excess of the requirements deep enough to reach the ply or cords. | 5.2.3(d)(i) | Major | 11% |
| 7 | Brake lining or pad worn below 1.0mm. | 1.1.13(a) | Dangerous | 11% |
| 8 | Rear registration plate lamp does not illuminate simultaneously with the position lamps. | 4.7.2(a) | Major | 11% |
| 9 | Binding brake. | 1.2.1(f) | Major | 11% |
| 10 | Steering head bearings defective or have excessive wear or play. | 2.2.2(f)(i) | Major | 11% |
Tests date range:
10th February 2023 to 9th February 2024
Contains public sector information licensed under the Open Government Licence v3
Share 
