MOT Stats
Vehicle types : Bike : MZ
MZ
| Model | Tests | Pass rate | Most common fail reason |
| 125 | 8 | 62.5% | Tyre not fitted in compliance with the manufacturer's sidewall instructions. |
| 125SX | 2 | 100% | n/a |
| 250 | 9 | 100% | n/a |
| 500 | 1 | 0% | Stop lamp remains on when the brakes are released. |
| 1000S | 3 | 33.33% | Fuel system leaking, or missing or ineffective filler cap. |
| Baghira | 77 | 77.92% | Position lamp missing or inoperative. |
| ETZ | 29 | 82.76% | Excessive fluctuation in brake effort through each wheel revolution. |
| ETZ125 | 21 | 71.43% | Insufficient brake control reserve travel. |
| ETZ150 | 4 | 100% | n/a |
| ETZ250 | 77 | 92.21% | Direction indicator lamp missing or inoperative. |
| ETZ251 | 37 | 94.59% | Throttle control not functioning correctly. |
| ETZ300 | 7 | 85.71% | Brake disc or drum insecure, fractured or otherwise likely to fail. |
| ETZ301 | 17 | 100% | n/a |
| Mastiff | 27 | 96.3% | Direction indicator lamp missing or inoperative. |
| S51 | 4 | 50% | Horn not working. |
| Saxon | 12 | 91.67% | Exhaust system leaking or insecure. |
| Scorpion | 3 | 66.67% | Footrest missing or insecure. |
| Skorpion | 43 | 86.05% | Rear reflector missing or reflecting white to the rear. |
| TS | 1 | 0% | Stop lamp missing or inoperative. |
| TS125 | 28 | 92.86% | A main load-bearing structural member corroded to the extent that the rigidity of the assembly is significantly reduced. |
| TS150 | 3 | 100% | n/a |
| TS250 | 6 | 83.33% | Footrest missing or insecure. |
| TS250/1 | 4 | 100% | n/a |
Tests: 423
Average MZ pass rate: 86.29%
Most common fail reasons
| # | Reason | Fail code | Category | % |
| 1 | Direction indicator lamp missing or inoperative. | 4.4.1(a)(ii) | Major | 14% |
| 2 | Stop lamp missing or inoperative. | 4.3.1(a)(ii) | Major | 14% |
| 3 | Rear reflector missing or reflecting white to the rear. | 4.8.2(a)(ii) | Major | 11% |
| 4 | Headlamp aim outwith limits. | 4.1.2(a) | Major | 11% |
| 5 | Position lamp missing or inoperative. | 4.2.1(a) | Major | 11% |
| 6 | Stop lamp remains on when the brakes are released. | 4.3.2(a)(iii) | Dangerous | 11% |
| 7 | Horn not working. | 7.7(a) | Major | 7% |
| 8 | Tyre not fitted in compliance with the manufacturer's sidewall instructions. | 5.2.3(i) | Major | 7% |
| 9 | Footrest missing or insecure. | 6.2.12(a) | Major | 7% |
| 10 | Fuel system leaking, or missing or ineffective filler cap. | 6.1.3(b)(i) | Major | 4% |
Tests date range:
23rd September 2022 to 22nd September 2023
Contains public sector information licensed under the Open Government Licence v3
Share 
