MOT Stats


Vehicle types : Bike : Keeway

Keeway

ModelTestsPass rateMost common fail reason
ARN1384.62%Headlamp missing or inoperative.
Blackster771.43%Headlamp missing or inoperative.
Cityblade5166.67%Brake lining or pad worn below 1.0mm.
Cruiser1275%Headlamp missing or inoperative.
Fact4067.5%Stop lamp remains on when the brakes are released.
Flash450%Tyre valve seriously damaged or misaligned, likely to cause sudden deflation of the tyre.
Hacker3100%n/a
Hurricane1464.29%Stop lamp remains on when the brakes are released.
Logik2669.23%Rear registration plate lamp or light source missing or inoperative.
Matrix850%Tyre valve seriously damaged or misaligned, likely to cause sudden deflation of the tyre.
Partner1070%Tyre tread depth too low.
Pixel333.33%Tyre valve seriously damaged or misaligned, likely to cause sudden deflation of the tyre.
RK41462.8%Transmission belt, chain, sprocket or pulley excessively loose or worn.
RKS19469.07%Transmission belt, chain, sprocket or pulley excessively loose or worn.
RKV1255076%Transmission belt, chain, sprocket or pulley so loose or worn it is likely to fail.
Speed2166.67%Binding brake.
Strike1546.67%Transmission belt, chain, sprocket or pulley excessively loose or worn.
Superlight1,03965.64%Stop lamp missing or inoperative.
Swan475%Brake grabbing severely.
Target1181.82%Steering head bearings in such a condition that steering control is adversely affected.
TX24851.61%Rear reflector missing or reflecting white to the rear.
TX50475%Shock absorber not functioning, or leaking severely.
TX1255657.14%Headlamp aim outwith limits.

Tests: 2,247

Average Keeway pass rate: 64.09%

Most common fail reasons

#ReasonFail codeCategory%
1Stop lamp missing or inoperative.4.3.1(a)(ii)Major21%
2Headlamp aim outwith limits.4.1.2(a)Major17%
3Transmission belt, chain, sprocket or pulley excessively loose or worn.6.1.7(c)(i)Major17%
4Headlamp missing or inoperative.4.1.1(a)(ii)Major12%
5Steering head bearings defective or have excessive wear or play.2.2.2(f)(i)Major9%
6Rear reflector missing or reflecting white to the rear.4.8.2(a)(ii)Major9%
7Shock absorber not functioning, or leaking severely.5.3.2(b)Major9%
8Binding brake.1.2.1(f)Major9%
9Stop lamp remains on when the brakes are released.4.3.2(a)(iii)Dangerous9%
10Brake lining or pad worn below 1.0mm.1.1.13(a)Dangerous8%
Tests date range:
3rd July 2020 to 2nd July 2021

Contains public sector information licensed under the Open Government Licence v3