MOT Stats
Vehicle types : Bike : KTM : 250
KTM 250
Year | Tests | Pass rate | Most common fail reason |
1997 | 1 | 0% | Wheel bearing play so excessive it is likely to break up or directional control impaired. |
2001 | 1 | 100% | n/a |
2002 | 6 | 100% | n/a |
2003 | 3 | 100% | n/a |
2004 | 3 | 66.67% | Insufficient brake control reserve travel. |
2005 | 3 | 66.67% | Wheel bearing with excessive play. |
2006 | 4 | 75% | Rear reflector missing or reflecting white to the rear. |
2007 | 11 | 81.82% | Wheel bearing play so excessive it is likely to break up or directional control impaired. |
2008 | 16 | 75% | Headlamp missing or inoperative. |
2009 | 10 | 70% | Horn not working. |
2010 | 14 | 71.43% | Rear reflector missing or reflecting white to the rear. |
2011 | 20 | 75% | Horn not working. |
2012 | 25 | 96% | Wheel bearing so rough it is likely to overheat or break up. |
2013 | 48 | 79.17% | Rear reflector missing or reflecting white to the rear. |
2014 | 108 | 84.26% | Rear reflector missing or reflecting white to the rear. |
2015 | 128 | 83.59% | Rear reflector missing or reflecting white to the rear. |
2016 | 65 | 86.15% | Horn not working. |
2017 | 9 | 66.67% | Position lamp missing or inoperative. |
2018 | 14 | 85.71% | Rear reflector missing or reflecting white to the rear. |
2019 | 5 | 80% | Steering head bearings defective or have excessive wear or play. |
2020 | 7 | 71.43% | Rear reflector missing or reflecting white to the rear. |
2021 | 4 | 75% | Headlamp missing or inoperative. |
Tests: 505
Average KTM 250 pass rate: 82.38%
Most common fail reasons
# | Reason | Fail code | Category | % |
1 | Rear reflector missing or reflecting white to the rear. | 4.8.2(a)(ii) | Major | 29% |
2 | Horn not working. | 7.7(a) | Major | 22% |
3 | Number plate does not conform to requirements. | 0.1(d) | Major | 16% |
4 | Wheel bearing with excessive play. | 5.1.3(a)(i) | Major | 12% |
5 | Position lamp missing or inoperative. | 4.2.1(a) | Major | 10% |
6 | Headlamp missing or inoperative. | 4.1.1(a)(ii) | Major | 7% |
7 | Stop lamp remains on when the brakes are released. | 4.3.2(a)(iii) | Dangerous | 7% |
8 | Tyre not fitted in compliance with the manufacturer's sidewall instructions. | 5.2.3(i) | Major | 7% |
9 | Stop lamp missing or inoperative. | 4.3.1(a)(ii) | Major | 6% |
10 | Wheel bearing play so excessive it is likely to break up or directional control impaired. | 5.1.3(a)(ii) | Dangerous | 6% |
Tests date range:
10th February 2023 to 9th February 2024
Contains public sector information licensed under the Open Government Licence v3