MOT Stats
Vehicle types : Bike : Husqvarna
Husqvarna
| Model | Tests | Pass rate | Most common fail reason |
| 310TE | 1 | 100% | n/a |
| 400 | 1 | 0% | Brake lining or pad worn below 1.0mm. |
| 410 | 3 | 100% | n/a |
| 449 | 1 | 0% | Brake control cannot be readily applied. |
| 570 | 1 | 0% | Tyre tread depth too low. |
| 610 | 10 | 70% | Throttle control functioning such that safe operation of the motorcycle is affected. |
| 701 | 425 | 87.29% | Rear reflector missing or reflecting white to the rear. |
| CR250 | 1 | 100% | n/a |
| FC | 1 | 100% | n/a |
| FE | 638 | 81.03% | Rear reflector missing or reflecting white to the rear. |
| FX | 2 | 50% | Rear reflector missing or reflecting white to the rear. |
| Nuda | 83 | 90.36% | Rear reflector missing or reflecting white to the rear. |
| SM | 7 | 57.14% | Tyre tread depth too low. |
| SM125S | 24 | 70.83% | Direction indicator lamp missing or inoperative. |
| SM450R | 15 | 80% | Rear reflector missing or reflecting white to the rear. |
| SM510R | 24 | 79.17% | Direction indicator lamp missing or inoperative. |
| SM610S | 58 | 84.48% | Position lamp missing or inoperative. |
| SMR | 12 | 83.33% | Rear reflector missing or reflecting white to the rear. |
| Svartpilen | 46 | 84.78% | Rear reflector missing or reflecting white to the rear. |
| TC | 1 | 100% | n/a |
| TC250 | 3 | 33.33% | Suspension pin, bush or joint: excessively worn. |
| TE | 614 | 79.97% | Rear reflector missing or reflecting white to the rear. |
| TE250 | 123 | 77.24% | Rear reflector missing or reflecting white to the rear. |
| TE310 | 62 | 77.42% | Rear reflector missing or reflecting white to the rear. |
| TE450 | 58 | 72.41% | Rear reflector missing or reflecting white to the rear. |
| TE510 | 30 | 83.33% | Brake fluid significantly below minimum mark. |
| TE610E | 36 | 69.44% | Headlamp missing or inoperative. |
| TR | 11 | 90.91% | Tyre incorrectly seated on the wheel rim. |
| TR650 | 32 | 100% | n/a |
| TXC | 2 | 100% | n/a |
| Vitpilen | 89 | 85.39% | Rear reflector missing or reflecting white to the rear. |
| WR | 20 | 80% | Number plate showing an incorrect registration. |
| WR125 | 38 | 65.79% | Horn inoperative. |
| WR250 | 36 | 66.67% | Rear reflector missing or reflecting white to the rear. |
| WR300 | 3 | 100% | n/a |
| WRE125 | 24 | 79.17% | Footrest missing or insecure. |
Tests: 2,535
Average Husqvarna pass rate: 81.34%
Most common fail reasons
| # | Reason | Fail code | Category | % |
| 1 | Rear reflector missing or reflecting white to the rear. | 4.8.2(a)(ii) | Major | 39% |
| 2 | Number plate does not conform to requirements. | 0.1(d) | Major | 17% |
| 3 | Horn inoperative. | 7.7(a)(ii) | Major | 12% |
| 4 | Headlamp aim outwith limits. | 4.1.2(a) | Major | 9% |
| 5 | Stop lamp missing or inoperative. | 4.3.1(a)(ii) | Major | 9% |
| 6 | Wheel bearing with excessive play. | 5.1.3(a)(i) | Major | 9% |
| 7 | Headlamp missing or inoperative. | 4.1.1(a)(ii) | Major | 7% |
| 8 | Position lamp missing or inoperative. | 4.2.1(a) | Major | 7% |
| 9 | Number plate showing an incorrect registration. | 0.1(c) | Major | 6% |
| 10 | Shock absorber not functioning, or leaking severely. | 5.3.2(b) | Major | 5% |
Tests date range:
25th December 2020 to 24th December 2021
Contains public sector information licensed under the Open Government Licence v3
Share 
