MOT Stats
Vehicle types : Bike : Benelli : BN
Benelli BN
Year | Tests | Pass rate | Most common fail reason |
2014 | 3 | 100% | n/a |
2015 | 6 | 100% | n/a |
2016 | 5 | 80% | Steering head bearings defective or have excessive wear or play. |
2017 | 3 | 66.67% | Excessive fluctuation in brake effort through each wheel revolution. |
2018 | 38 | 71.05% | Binding brake. |
2019 | 100 | 75% | Transmission belt, chain, sprocket or pulley excessively loose or worn. |
2020 | 203 | 70.44% | Transmission belt, chain, sprocket or pulley excessively loose or worn. |
2021 | 19 | 57.89% | Rear registration plate lamp or light source missing or inoperative. |
2022 | 4 | 50% | Handlebar fractured, deformed or corroded to the extent that steering is adversely affected or detachment likely. |
Tests: 381
Average Benelli BN pass rate: 71.65%
Most common fail reasons
# | Reason | Fail code | Category | % |
1 | Transmission belt, chain, sprocket or pulley excessively loose or worn. | 6.1.7(c)(i) | Major | 20% |
2 | Headlamp aim outwith limits. | 4.1.2(a) | Major | 12% |
3 | Rear registration plate lamp or light source missing or inoperative. | 4.7.1(b)(ii) | Major | 11% |
4 | Brake efficiency below minimum requirement. | 1.2.2(a)(i) | Major | 11% |
5 | Stop lamp remains on when the brakes are released. | 4.3.2(a)(iii) | Dangerous | 10% |
6 | Stop lamp missing or inoperative. | 4.3.1(a)(ii) | Major | 10% |
7 | Suspension pin, bush or joint: excessively worn. | 5.3.4(a)(i) | Major | 8% |
8 | Binding brake. | 1.2.1(f) | Major | 8% |
9 | Rear reflector missing or reflecting white to the rear. | 4.8.2(a)(ii) | Major | 8% |
10 | Rear registration plate lamp does not illuminate simultaneously with the position lamps. | 4.7.2(a) | Major | 8% |
Tests date range:
10th February 2023 to 9th February 2024
Contains public sector information licensed under the Open Government Licence v3