MOT Stats

Benelli

Model	Tests	Pass rate	Most common fail reason
49X	12	41.67%	Brake fluid significantly below minimum mark.
50	1	100%	n/a
250	4	100%	n/a
254	1	100%	n/a
304	1	100%	n/a
491	10	80%	Headlamp aim unable to be tested.
654	2	100%	n/a
750SEI	3	100%	n/a
900	9	88.89%	Direction indicator lamp missing or inoperative.
Adiva	7	71.43%	Brake lining or pad worn below 1.0mm.
BN	6	83.33%	Rear registration plate lamp does not illuminate simultaneously with the position lamps.
K2	2	100%	n/a
Magnum	1	100%	n/a
Pepe	10	50%	Inadequate braking effort at a wheel.
SEI	6	100%	n/a
TNT	29	93.1%	Stop lamp remains on when the brakes are released.
Tornado	71	85.92%	Tyre tread depth too low.
TRE	14	85.71%	Shock absorber not functioning, or leaking severely.
Velvet	9	66.67%	Exhaust noise levels in excess of those permitted.

Tests: 198

Average Benelli pass rate: 82.32%

Most common fail reasons

#	Reason	Fail code	Category	%
1	Shock absorber not functioning, or leaking severely.	5.3.2(b)	Major	11%
2	Insufficient brake control reserve travel.	1.1.2(a)	Major	11%
3	Brake lining or pad worn below 1.0mm.	1.1.13(a)	Dangerous	11%
4	Tyre tread depth too low.	5.2.3(e)	Dangerous	11%
5	Headlamp aim outwith limits.	4.1.2(a)	Major	11%
6	Direction indicator lamp missing or inoperative.	4.4.1(a)(ii)	Major	9%
7	Inadequate braking effort at a wheel.	1.2.1(a)(i)	Major	6%
8	Tyre seriously damaged.	5.2.3(d)(i)	Major	6%
9	Wheel bearing excessively rough.	5.1.3(b)(i)	Major	6%
10	Rear registration plate lamp does not illuminate simultaneously with the position lamps.	4.7.2(a)	Major	6%

Tests date range: 20th May 2018 to 3rd August 2018

Contains public sector information licensed under the Open Government Licence v3