MOT Stats
Vehicle types : Car : Audi
Audi
Model | Tests | Pass rate | Most common fail reason |
80 | 878 | 65.95% | Suspension pin, bush, joint or bearing excessively worn. |
90 | 100 | 79% | Parking brake efficiency below minimum requirement. |
100 | 188 | 69.15% | Windscreen washers not providing sufficient fluid. |
200 | 20 | 70% | ESC switch damaged or not functioning correctly. |
A1 | 208,372 | 78.12% | Suspension pin, bush, joint or bearing excessively worn. |
A2 | 6,826 | 54.69% | Suspension spring broken or seriously weakened. |
A3 | 415,176 | 74.56% | Suspension spring broken or seriously weakened. |
A3TDI | 16 | 50% | Suspension joint dust cover missing or ineffective. |
A4 | 260,466 | 72.52% | Suspension spring broken or seriously weakened. |
A5 | 122,503 | 78.65% | Tyre with a lump, bulge or tear. |
A6 | 126,601 | 79% | Tyre tread depth not in accordance with requirements. |
A7 | 16,599 | 84.32% | Tyre with a lump, bulge or tear. |
A8 | 11,812 | 86.36% | Tyre with a lump, bulge or tear. |
Allroad | 2,247 | 71.3% | Suspension pin, bush, joint or bearing excessively worn. |
Avant | 18 | 77.78% | Wiper blade missing or not clearing the windscreen. |
Cabriolet | 1,092 | 65.29% | Suspension pin, bush, joint or bearing excessively worn. |
Convertible | 125 | 70.4% | Tyre with a lump, bulge or tear. |
Coupe | 551 | 76.04% | Position lamp missing or inoperative. |
e-tron | 7,205 | 90.52% | Tyre with a cut in excess of the requirements. |
Q2 | 60,697 | 90.48% | Tyre with a cut in excess of the requirements. |
Q3 | 120,136 | 83.96% | Suspension spring broken or seriously weakened. |
Q5 | 100,375 | 83.76% | Constant velocity joint boot missing, split, insecure or no longer prevents the ingress of dirt. |
Q7 | 46,661 | 81.95% | Tyre with a lump, bulge or tear. |
Q8 | 3,350 | 90.54% | Tyre with a cut in excess of the requirements. |
Quattro | 528 | 82.01% | Emissions levels exceed default limits. |
R8 | 3,694 | 90.15% | Fog lamp inoperative or rear fog lamp missing. |
RS2 | 10 | 70% | Emissions levels exceed default limits. |
RS3 | 120 | 91.67% | Headlamp aim outwith limits. |
RS4 | 1,730 | 83.93% | Tyre with a lump, bulge or tear. |
RS5 | 204 | 90.2% | Tyre with a lump, bulge or tear. |
RS6 | 1,337 | 86.24% | Tyre with a lump, bulge or tear. |
RS7 | 153 | 88.89% | Tyre with a lump, bulge or tear. |
RS Q3 | 847 | 91.74% | Tyre tread depth not in accordance with requirements. |
S1 | 157 | 78.98% | Suspension spring broken or seriously weakened. |
S2 | 1 | 0% | Windscreen washers not providing sufficient fluid. |
S3 | 4,264 | 80.79% | Suspension spring broken or seriously weakened. |
S4 | 2,278 | 83.58% | Tyre with a lump, bulge or tear. |
S5 | 1,745 | 81.43% | Tyre with a lump, bulge or tear. |
S6 | 406 | 81.28% | Tyre with a lump, bulge or tear. |
S7 | 145 | 93.1% | Tyre with a cut in excess of the requirements. |
S8 | 214 | 83.18% | Constant velocity joint boot missing, split, insecure or no longer prevents the ingress of dirt. |
SQ5 | 1,091 | 91.38% | Tyre with a cut in excess of the requirements. |
SQ7 | 759 | 86.96% | Tyre with a lump, bulge or tear. |
TT | 112,601 | 75.73% | Tyre tread depth not in accordance with requirements. |
TTS | 129 | 86.05% | Tyre with a lump, bulge or tear. |
V8 | 11 | 81.82% | Horn not working. |
Tests: 1,644,438
Average Audi pass rate: 77.78%
Most common fail reasons
# | Reason | Fail code | Category | % |
1 | Tyre tread depth not in accordance with requirements. | 5.2.3(e) | Dangerous | 13% |
2 | Tyre with a lump, bulge or tear. | 5.2.3(d)(ii) | Dangerous | 13% |
3 | Suspension spring broken or seriously weakened. | 5.3.1(b)(i) | Major | 13% |
4 | Suspension pin, bush, joint or bearing excessively worn. | 5.3.4(a)(i) | Major | 10% |
5 | Headlamp aim outwith limits. | 4.1.2(a) | Major | 8% |
6 | Brake lining or pad worn below 1.5mm. | 1.1.13(a)(ii) | Dangerous | 7% |
7 | Tyre with a cut in excess of the requirements. | 5.2.3(d)(i) | Major | 7% |
8 | Constant velocity joint boot missing, split, insecure or no longer prevents the ingress of dirt. | 6.1.7(g)(ii) | Major | 7% |
9 | Windscreen washers not providing sufficient fluid. | 3.5(a) | Major | 6% |
10 | Suspension joint dust cover missing or ineffective. | 5.3.4(b)(ii) | Major | 6% |
Tests date range:
10th February 2023 to 9th February 2024
Contains public sector information licensed under the Open Government Licence v3